Adjusting the Menu Settings
Channel Menu
Select Antenna / Cable
Select Antenna or Cable depending on which you have attached to your TV.
1Press MENU.
2 | Press | or | to select “Channel”, then press | or OK. |
3 | Press | or | to select “TV Mode”, then press | or OK. |
4 | Press | or | to select “Antenna” or “Cable”, then press OK. |
Scan Channels
Auto Scan Channels
TV Mode | Cable |
|
|
Auto Channel Scan |
|
Partial Channel Scan |
|
Find Channel |
|
Channel Management |
|
Digital MTS | English |
The TV is equipped with a channel memory. When you run auto scan, the TV scans for channels with network signals and memorizes them into memory. It may take 15 to 30 minutes to memorize digital cable channels depending on the reception condition.
1
2
3
Press MENU. |
| |
Press | or | to select “Auto Channel Scan”, then press or OK. |
Press | or | to select “Start Scan”, then press OK. |
Scanning progress is displayed on the menu screen. To stop scanning, select “Stop Scan” and press
OK.
Partial Scan Channels
You can partially scan for network signal within a speciange of channels.
1Press MENU.
2Press or to select “Partial Channel Scan”, then press or OK.
3 | Press | or | to select “Scan Mode”, then press or OK. |
4 | Press | or | to select an option, then press OK |
t“Analog/Digital”: scan for both analog and digital channels
t“Analog”: scan for analog channels
t“Digital”: scan for digital channels
5Press or to select “From Channel”, then enter a starting channel range.
6Press or to select “To Channel”, then enter an ending channel range.
7 Press | or | to select “Start Scan”, then press OK. |
Scanning progress is displayed on the menu screen. To stop scan, select “Stop Scan” and press OK.
34