JVC LT-32A60SJ, LT-26A60SJ manual Choose a TV channel and watch images from external devices

LT-26A60SJ / LCT1863-001A-U / English

LT-26A60SJ_Eng.book Page 15 Friday, April 15, 2005 1:49 PM

Remote control buttons and functions

Choose a TV channel and watch images from external devices

„Use the number buttons:

Enter the programme number (PR) of the channel using the number buttons.

Example:

•PR 6 → press 6

•PR 12 → press 1 and 2

„Use the pp buttons: Press the pp buttons to choose the programme number (PR) you want or an EXT terminal.

„Use the AV button:

Press the AV button to choose an EXT terminal.

TV mode EXT modes

Programme

numbers

PR 1 – PR 99

or

•Since this TV is designed to make full use of the resolution of the original video source, the motion may appear unnatural when the video source is input with progressive-scanning component signals. If this happens, change the output setting of the connected device to interlace- scanning component signal output. See the instructions that came with the device for more information.

•The PC sound is the same as the EXT-3 sound.

To return to a TV channel:

Press the b button, the 6buttons or the number buttons.

To use the programme number PR 0 (AV):

When the TV and VCR are connected only by the aerial cable, choosing the programme number PR 0 (AV) allows you to view images from the VCR. Set the VCR RF channel to the programme number PR 0 (AV) manually. For details, see “EDIT/ MANUAL” on page 32.

Pressing the Gbutton changes the choice as follows:

TV mode EXT modes

or

Programme

numbers

PR 1 – PR 99

PR 0

EXT-1

EXT-2

or

EXT-3

or

•You can choose a video input signal from the S-VIDEO signal (Y/C signal) and regular video signal (composite signal). For details, see “S-IN(S-VIDEO input)” on page 37.

EXT-4

•If you do not have a clear picture or no colour appears, change the colour system manually. See “COLOUR SYSTEM” on page 26.

•If you choose an EXT terminal with no input signal, the EXT terminal number becomes fixed on the screen.

•The VCR sends its playback image along the aerial cable as an RF (radio frequency) signal.

•Also see your VCR instruction manual.

15