JVC LT-23S2 manual Other concerns

Page 31

Troubleshooting

Other concerns

•When the SLEEP TIMER function operates, the TV is automatically turned off. If the TV suddenly turns off, try to press the (standby) button to turn on the TV once again. If the TV goes back to normal, there is no problem.

•When the TV is receiving a wide-screen signal (WSS) or a signal from an external device affecting the screen size, the ZOOM mode automatically changes. When you want to resume the previous ZOOM mode, press the ZOOMbutton again.

•It takes a short period of time from the time an operation such as changing channels is performed until an image is displayed. This is not a malfunction. This is the time required for the image to stabilize before it can be displayed.

•The TV may make a crackling sound due to a sudden change in temperature. The picture or sound may be normal. If you hear crackling sounds frequently while you are viewing the TV, there may be other causes. As a precaution, ask your service technician to inspect it.

•In the twin pictures mode the sub-picture may disappear when the external device is operated. If this happens, press the button and display the sub-picture again.

•The top of the TV and the screen may become hot during use but this has no affect on the performance of the TV. Ensure that the ventilation holes are not blocked.

•When the picture is unstable, the screen may become white for a moment. This occurs when the signal which drives the liquid crystal is missing. This is not a malfunction.

•When a still image has been displayed for a long period, a faint residual image may remain on the screen for a short time after the power has been turned off or when another image is displayed. This is not a malfunction and the image will eventually disappear.

•When the correct picture has not been displayed on screen, the following error messages will display on screen.

NO SIGNAL - TV recived no signal from PC, you may check your PC is working correctly or not.

CABLE NO INSERT - The cable is not connected correctly. Ensure that the cable is connected correctly.

OUT OF RANGE - The picture resolution is out of limit. Ensure that the PC picture resolution is set correctly.

30

Page 30 Page 32
Image 31
Page 30 Page 32
Contents LT-17S2 LT-23S2 English Point defects Cleaning the screenDistance recommendations Contents Installation Setting up your TVUsing the stand Remove the terminal cover Putting the batteries into the Remote controlConnect to the TV and to the AC outlet Language Initial settingsInitial settings TV buttons and functions Turn the TV on or off from standby mode Remote control buttons and functionsPress the standby button to turn the TV on or off To use the Programme number PC modeWatch images from external equipment Displaying the source informationAdjusting the visible area of the picture Choose the Zoom modeZoom function Picture mode Sleep timer functionUsing the Pcpip function DVD Set the VCR/TV/DVD switch to the VCR or DVD positionOperating a JVC brand VCR or DVD player VCRHold To cancel the Hold functionTeletext function Basic operationSize CancelSub-page RevealUsing the TV’s menu White Balance Picture ModePicture Adjustment ResetHyper Sound Sound AdjustmentChild Lock Blue BackPage Delete To edit the PR List menuName InsertPress the green button to start the Insert function To return to the Install menuPress the / and / buttons to choose a new program number LT-17S2 PC support mode list Sound PC Menu In PC mode onlyPC Picture Position PC PictureLT-23S2 PC support mode list LT-17S2 Before connecting anything Connecting external equipment Additional preparation Connecting the PC Connecting headphonesConnecting Speakers/Amplifier Troubleshooting Other concerns Design and specifications subject to change without notice SpecificationsVictor Company of Japan, Limited MK-TU
Top Page Image Contents