JVC HD-Z56RX5 manual Using the Multi-picture function, Return Plus function and Return function

Remote control buttons and functions

Using the “Multi-picture” function

1Set the VCR/TV/DVD switch to the TV position

When using the “Multi-picture” function, set the VCR/TV/DVD switch to the TV position.

2Press the Xbutton

The “Multi-picture” menu appears.

1 2 12

•When set to 2-pictures multi, picture from HDMI can not be displayed on the Sub-picture.

•The pictures from VIDEO-1 (or VIDEO-2) cannot be displayed in the sub-picture when the VIDEO-1 SETTING (or VIDEO-2 SETTING) is set to COMPONENT (see page 23).

•The “Multi-picture” function does not work for a PC signals.

•When set to 12-pictures multi, press the 7 buttons to choose the screen you want to view and the press the a button to display that picture on the whole screen.

•The BLUE BACK function does not work when the “Multi- picture” function is being used.

•The ZOOM function does not work when the “Multi-picture” function is being used.

ENGLISH

3Press the 5 buttons to choose the number of screens and then press the a button

1Choose to return to one screen.

2Choose to change to 2-pictures multi.

To return the “Multi-picture” to one screen:

Press the Xbutton, press the 5 buttons to choose one screen, and then press the abutton.

•Pressing the 4button will also return the display to one screen.

RETURN PLUS function and Return function

12Choose to change to 12-pictures multi.

2-pictures multi:

Main-	Sub-
picture	picture

With 1125i and 750p signals, the screen is split into two as shown below.

The 1button has two functions; the RETURN PLUS function and the Return function. If a channel has been registered as the “Return Channel”, the RETURN PLUS function operates. If there is no setting for the “Return Channel”, the Return function operates.

„ RETURN PLUS

By registering a channel you frequently view as the “Return

Channel”, you can select that channel at any time simply by pressing

the 1button.

To register a TV channel as the “Return Channel”:

Press and hold 1button for more than 3 seconds while the

channel you want to register is chosen. “RETURN PLUS

Main- picture

12-pictures multi:

Sub- picture

Still pictures

Moving picture

PROGRAMMED!” is displayed and the registration is completed.

To cancel a TV channel registered as the “Return

Channel”:

While viewing any TV channel, press the 1button and

hold for more than 3 seconds continuously. “RETURN PLUS

CANCELED!” is displayed and the registration is cancelled.

• When you turn off the TV, the registration for the “Return

Channel” is cancelled.

• If you want to view the “Return Channel” and another TV channel

alternately, first choose a channel other than the “Return Channel”.

And then press the 1button to change the channel to

the “Return Channel.” In this way, you can view two channels

•When set to 2-pictures multi, you can view a TV picture and a picture from an external device. You cannot view a TV picture on more than one screen at the same time.

•When 12-pictures multi is set, pictures from external devices are not displayed.

•When watching a picture from the HDMI signal, 12-pictures multi can not be displayed.

•When set to 2-pictures multi, the main-picture can be changed by pressing the 6p buttons. The sub-picture screen can be changed by pressing the p buttons.

When set to 12-pictures multi and there are more than 12 pictures, the next or previous 12 screens can be displayed by pressing the 6p buttons.

•When set to 2-pictures multi, the main-picture sound from the TV speaker can be changed to the sub-picture sound by pressing the cbutton when the VCR/TV/DVD switch is set to the VCR position. (The speaker mark moves from the main- picture to the sub-picture.)

The sound changes to the main-picture sound if the cbutton is pressed again.

When the headphones are connected, you can listen to the sound from the side at which the headphones mark is displayed. No sound comes from the TV speaker.

alternately by pressing the 1button.

„ Return function

The TV temporarily memorises the TV channel that was chosen right

before the current TV channel as the “Last Channel”. By pressing the

1button, you can alternately view the current TV channel

and the “Last Channel”.

If you want to view two channels alternately by using the Return

function, first choose one TV channel and then choose the other TV

channel with the number buttons. If you choose the TV channel

without using the number buttons, there are cases where a channel

other than the one you first chose is registered as the “Last Channel”.

11