JVC LT-26C50SU manual „ Insert, „ Manual, To cancel the Insert function, France, Other TV channels

SET UP menu

„ INSERT „ MANUAL

1Press the 6 buttons to choose a programme number (PR) for which you will register a new TV channel

2Press the green button and start the INSERT function

> EDIT

PR	ID	CH/CC
AV
01	BBC1	CH	21
02		CH	22
03		CH	23
04		CH	24
05		CH	25
06		CH	26
07		CC
08		CC	02
09		CC	03

OK 0 9

CH/CC

D0034-EN

To cancel the INSERT function:

Press the bbutton.

3Press the 6 buttons to choose “CH” or “CC”, then enter the remaining CH or CC number

When the COUNTRY setting is

FRANCE:

Choose “CH1”, “CH2”, “CC1” or “CC2”.

The TV shifts to registration mode. When the registration is completed, the picture of the TV channel appears on the screen.

•The CH/CC number is a number given to each broadcast frequency that carries a TV channel. If the TV cannot detect the TV channel corresponding to the broadcast frequency indicated by the CH/CC number, a “no-signal” picture appears.

1Press the 6 buttons to choose a programme number (PR) for a new TV channel

2Press the blue button to activate the MANUAL function

At the right side following the CH/CC number, the SYSTEM (broadcasting system) of the TV channel appears.

> MANUAL

PR	ID	CH/CC
AV
01	BBC1	CH	21
02		CH	22
03		CH	23
04		CH	24
05		CH	25
06		CH	26
07		CC	01	(B / G)
08		CC	02
09		CC	03
		SEARCH+		FINE-
OK	SYSTEM
		SEARCH-		FINE+

D0035-EN

To cancel the MANUAL function: Press the bbutton.

3Press the 3 button to choose the SYSTEM (broadcasting system) for a TV channel you want to register

TV channel (SECAM-L system) from a French station:

Set the SYSTEM to “L”. If it is set to one other than “L”, you cannot receive the TV channel of the SECAM-L system.

Other TV channels:

If you do not know the correct broadcasting system, set the SYSTEM to “B/G”. If “B/G” is not correct, you will not hear the sound normally when the TV detects a TV channel. In this case, retry to set the SYSTEM correctly so that no problem arises.

40