JVC LT-37DM6ZJ manual Picture

Problem

Not displayed (black screen)

Basics	Remote control
	stops working

DTV screen is frozen

Some functions do not work

Actions

Is the ATV reception poor, too?

Following the instructions in "Severe noise or snow" can solve this problem.

Is there a DTV transmission tower nearby?

Turn "ATTENUATOR" to "ON", since the radio waves are too strong.

There may be problems at the antenna, radio waves, or the area you live in, where reception is bad. Consult your retailer.

When a media card is inserted into the TV, remove the card fi rst. Then, unplug TV, several minutes later plug it in again.

Hold down and on the TV simultaneously to restart.

It is not a malfunction. Some functions (dark background) in the menu do not work depending on the situation.

page

46

37

-

-

-

-

IMPORTANT! PREPARE

Aspect ratio changes unintentionally

Screen	Black or white dots
	appear on the screen

Poor picture quality

Picture

Strange picture

when using an external device

Press to return to your settings.

LCD panels use fi ne dots ("pixels") to display images. While more than 99.99% of these pixels function properly, a very small number of pixels may not light,

or may light all the time.

Please understand that this is not a malfunction.

Unnatural colour >>> Adjust COLOUR and BRIGHT-1. Check your COLOUR SYSTEM.

Noise >>> Set to the following functions.

PICTURE MODE : STANDARD

DIGITAL VNR : AUTO (HIGH)

Super DigiPure : MIN

Dull picture >>> Set to the following functions.

PICTURE MODE : BRIGHT

DIGITAL VNR : MIN

Super DigiPure : MAX

If you connected S-Video output device, check the “S-IN” setting.

If the top of the image is distorted, check the video signal quality itself.

If movement appears unnatural when receiving a signal from a DVD player, etc. with 625p (progressive-scanning), change the output setting of the external device to 625i (interlace-scanning).

20

-	USE
37
44
37
44
44	SETTINGS
37
44
44
27
	TROUBLE?
-

-

47