JVC LT-32DV20 Preparation, 5Antenna Connection, 5Connection to Cable Receiver or Satellite Box

Page 10

PREPARATION

No supplied cables are used in this connection:

Please purchase the necessary cables at your local store.

High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility.

Before you connect...

Be sure your antenna or other device is connected properly before plugging in the AC power cord.

5Antenna Connection

Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit.

rear of this unit

e.g.)

VHF / UHF antenna

RF coaxial cable

or

cable TV signal

*Once connections are completed, turn on the unit and begin initial setup. Channel scanning is necessary for the unit to memorize all available channels in your area. (Refer to “Initial Setup” on page 15.)

Note:

•If you have any question about the DTV’s antenna, visit www.antennaweb.org for further information.

•Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters). Contact your local electronics store for these items.

•For your safety and to avoid damage to this unit, please unplug the RF coaxial cable from the antenna input jack before moving the unit.

•If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be more effective than settop versions.

•To switch your reception source easily between antenna and cable, install an antenna selector.

•If you connect to the cable system directly, contact the CATV installer.

5Connection to Cable Receiver or Satellite Box

Use an HDMI or an RCA component video cable to connect the HDMI or the component video input jack of the unit to the HDMI or the component video output jack of the cable receiver / satellite box.

If you connect to the unit’s component Video Input jack, connect RCA audio cables to the Audio L/R jacks below the Component Video connector.

e.g.)

satellite dish

or

cable TV signal including PPV

HDMI OUT

 

 

HDMI cable

 

or

 

 

 

or

AUDIO OUT

COMPONENT VIDEO OUT

L

R

Y

Pb/Cb Pr/Cr

 

 

ANT IN

 

 

 

RF coaxial

(blue)

(red)

(green)

cable

(green)

 

 

 

(blue)

 

 

 

 

 

 

 

 

(red)

 

S ER O

 

 

 

 

CM

 

 

 

 

cable receiver / satellite box

 

 

 

 

 

 

 

RCA component video cable

 

 

 

 

and RCA audio cable

side or

rear of this unit

*You can also connect this unit to the cable receiver or satellite box other than the HDMI or the component video output jack because they might have different output jacks.

*Required cables and connecting methods of the cable receiver / satellite box, or the availability channel for the clear QAM may differ depending on the cable / satellite provider. For more information, please contact your cable / satellite provider.

10

EN

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Important Note Model No Serial NumberFCC Warning PrecautionsRADIO-TV Interference 5Trademark Information Introduction 5Supplied Accessories5Symbols Used in this Manual 5Attaching the StandFeatures DTV/TV/CATVContents TV Functions DVD Functions5Control Panel 5Terminals5Remote Control Function 5Installing the Batteries Battery Precautions5Antenna Connection Preparation5Connection to Cable Receiver or Satellite Box Hdmi Connection 5External Device ConnectionHDMI-DVI Connection Component Video Connection Video ConnectionIntroduction Preparation Audio Output Connection5Cable Management 5Plug In the AC Power CordResolution PC ConnectionBefore you begin TV Functions 5Initial SetupAfter an initial setup is completed Make sure the unit is connected to antenna or cableWatching TV 5Volume Adjustment5Sleep Timer 5Channel Selection5Switching Each Input Mode 5Still Mode5Switching Audio Mode Press Info 5TV Screen InformationBroadcasting information Program title Program guide5TV Screen Display Mode For 169 video signal5Main Menu Optional SettingAutoscan Manual Register Press Setup to display the main menu5Channel List EnterUse Cursor K/L to select Antenna, then press Enter 5Antenna Confirmation5Language Selection Use Cursor K/L to select LANGUAGE, then press EnterAdjust the picture quality 5Picture AdjustmentPicture Mode Use Cursor K/L to select PICTURE, then press EnterSound Mode 5Sound AdjustmentAuto Volume Leveling TV SpeakersCC3 and Text3 Caption Service5Closed Caption CC2, CC4, Text2 and Text4Use Cursor K/L to select Caption Style, then press Enter Digital Caption ServiceService 1~6 Use Cursor K/L to select On, then press EnterFont Color Font StyleFont Size Font Opacity5Child Lock Use Cursor K/L to select Child Lock, then press EnterUse Cursor K/L to select Channel Lock, then press Enter Channel Lock Mpaa RatingFunction Association of America Use Cursor K/L to select Mpaa Rating, then press EnterUse Cursor K/L to select TV Rating, then press Enter TV RatingTo set the sub ratings TV RatingNew Password New PasswordUse Cursor K/L to select New Password, then press Enter Confirm passwordPosition Reset 5PC SettingsHorizontal Position, Vertical Position Use Cursor K/L to select Location, then press Enter 5Energy Saving Mode 5LocationEnergy Saving i Mode Use Cursor K/L to select the desired mode, then press EnterConfirm the version of the software currently used 5Current Software InfoCurrent Software Info DVD Functions 5Playable Media Operating DVD5Unplayable Media 5Disc Menu Playback5Resume Playback 5Slow Forward / Slow Reverse 5Fast Forward / Fast ReverseZoom Chapter / Title / Track Search During playback, press Mode repeatedly until / appears5Search Functions You can select chapters, titles or tracks on the discDirect Search Time Search5Repeat Playback 5Random Playback 5Repeat A-B PlaybackYou can repeat playback between a and B on a disc 5On-screen Display 5Special SettingsDuring playback, press Mode repeatedly until Subtitle LanguageCamera Angles Black Level SettingPress Cursor K/ L to adjust the black level Audio LanguageMarker Setup Stereo Sound ModeVirtual Surround Subtitle *1, *2Default OFF DVD Setting5DVD Language Setting Select the desired subtitle languageDown Sampling 5DVD Audio SettingPCM Number buttons to enter the current 4-digit password 5Parental SettingParental Level You can change the other functions Still ModeOthers FieldUse Cursor K/ L to select DVD, then press Enter 5Reset to the Default Setting 5Language Code ListUse Cursor K/ L to select YES, then press Enter Using Channel / +. Refer toSwitching Each Input Modeon Remote controlWhen autoscan is interrupted and not completed Refer to Autoscan onTroubleshooting 5Troubleshooting GuideCaptions are displayed as a White box You switch to a different input and the volumeCheck the Parental setting Black box is displayed on the TV screenGlossary MaintenanceInformation Ntsc5Other Specifications 5General Specifications5Electrical Specification 5Cable Channel DesignationsDo not attempt to service the product yourself Page JVC Company of America Division of JVC Americas Corp Valley Road Wayne, New Jersey
Top Page Image Contents