JVC 1EMN24939, A94N5UH manual Introduction, Supplied Accessories, Attaching the Stand, Tilt Stand

Page 4

INTRODUCTION

Supplied Accessories

remote control (RM-C-2152)

batteries (AA x 2)	Screw for attaching the
	stand x 3 (FPH34120)
AA
AA

•If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free customer support line found on the cover of this manual.

Attaching the Stand

You must attach the stand to the unit to have it as a table top unit. Be sure the front and rear of the stand match the proper direction.

1Spread a thick and soft cloth over a table as shown below.

Place the main unit face down onto it. Make sure not to damage the screen.

2Align the 2 stand hooks with the two hooks under the bottom of the main unit (shown by arrow ➀), then slide the stand in the direction as shown by arrow ➁until it stops and the 4 mounting holes are aligned.

Make sure not to put the AC power cord between the stand and the unit.

3Drive Screws in the 3 threaded holes at the bottom of the stand until they are tight.

screw holes

front

side

To remove the stand from this unit
Unscrew the screws indicated by above “➂”screw holes.
After the screws are removed pull the stand up toward the rear of
the unit. Be careful not to drop the stand when you remove it.

Note:

•When attaching the stand, ensure that all screws are tightly fastened. If the stand is not properly attached, it could cause the unit to fall, resulting in injuries as well as damage to the unit.

•Make sure to use a table which can support the weight of this unit and is larger than this unit.

•Make sure the table is in a stable location.

Symbols Used in this Manual

The following is the description for the symbols used in this manual. Description refers to:

TV FUNCTIONS

DVD FUNCTIONS

TV : Analog TV operation

DTV : Digital TV operation

•If neither symbol appears under the function heading, operation is applicable to both.

DVD : Playback of DVD-video

CD : Playback of audio CD

•If neither symbol appears under the function heading, operation is applicable to both.

Tilt Stand	-2.5°

You can adjust the stand to change the angle of the unit (-2.5° to 10°).

10°

4

EN

Image 4

Contents Important Note Model No Serial NumberPrecautions Only use attachments/accessories specified by ManufacturerFCC Warning RADIO-TV InterferenceTrademark Information Supplied Accessories Symbols Used in this ManualIntroduction Attaching the StandFeatures DTV/TV/CATVContents TV Functions DVD FunctionsControl Panel TerminalsRemote Control Function Installing the Batteries Battery PrecautionsPreparation Antenna ConnectionConnection to Cable Receiver or Satellite Box Satellite providerHdmi Connection External Device ConnectionHDMI-DVI Connection Component Video Connection Video ConnectionInformation Resolution Plug In the AC Power CordPC Connection Initial Setup After an initial setup is completedTV Functions Before you beginVolume Adjustment Sleep TimerWatching TV Channel SelectionSwitching Each Input Mode Still ModeSwitching Audio Mode TV Screen Information Broadcasting informationPress Info Following information is displayedTV Screen Display Mode Main Menu Optional SettingAutoscan Channel List Manual Register Using Channel -/ +Enter Press Setup to exit Antenna ConfirmationLanguage Selection Use Cursor K/L to select Antenna, then press EnterPicture Adjustment Picture ModeColor Temperature Press Setup to exitSound Adjustment Sound ModeAdjust the following items TV SpeakersCaption mode Caption ServiceClosed Caption Digital Caption Service Service 1~6Use Cursor K/L to select Caption Style, then press Enter Use Cursor K/L to select On, then press EnterFont Style Font SizeFont Color Font OpacityChild Lock Use Cursor K/L to select Child Lock, then press EnterChannel Lock Mpaa Rating Function Association of AmericaUse Cursor K/L to select Channel Lock, then press Enter Use Cursor K/L to select Mpaa Rating, then press EnterTV Rating To set the sub ratingsUse Cursor K/L to select TV Rating, then press Enter TV RatingNew Password Use Cursor K/L to select New Password, then press EnterNew Password Confirm passwordPC Settings Auto AdjustmentClock, Phase Horizontal Position, Vertical PositionEnergy Saving Mode LocationUse Cursor K/L to select the desired mode, then press Enter Use Cursor K/L to select Location, then press EnterConfirm the version of the software currently used Current Software InfoCurrent Software Info DVD Functions Playable Media Operating DVDUnplayable Media Disc Menu PlaybackResume Playback Slow Forward / Slow Reverse Fast Forward / Fast ReverseZoom During playback, press Mode repeatedly until / appears Search FunctionsChapter / Title / Track Search You can select chapters, titles or tracks on the discDirect Search Time SearchRepeat Playback Random Playback Repeat A-B PlaybackYou can repeat playback between a and B on a disc Special Settings On-screen DisplaySubtitle Language PlaybackBlack Level Setting Press Cursor K/ L to adjust the black levelCamera Angles Audio LanguageMarker Setup Stereo Sound ModeVirtual Surround DVD Setting DVD Language SettingSubtitle *1, *2Default OFF Select the desired subtitle languageDVD Audio Setting Down SamplingBitstream PCMParental Setting If you have set password already, useNumber buttons to enter the current 4-digit password Use the Number buttons to enter the new 4-digit passwordOthers Auto Power OFFYou can change the other functions Reset to the Default Setting Language Code List Use Cursor K/ L to select DVD, then press EnterUse Cursor s / B to select , then press Enter Use Cursor K/ L to select YES, then press EnterRemote control When autoscan is interrupted and not completedUsing Channel / +. Refer toSwitching Each Input Modeon Refer to Autoscan onTroubleshooting Troubleshooting GuideYou switch to a different input and the volume Check the Parental settingCaptions are displayed as a White box Black box is displayed on the TV screenMaintenance InformationGlossary NtscGeneral Specifications Electrical SpecificationOther Specifications Cable Channel DesignationsDo not attempt to service the product yourself Page JVC Company of America Division of JVC Americas Corp Valley Road Wayne, New Jersey