Mitsumi electronic C10 SERIES manual Status Indicator, TV Control Panel

Page 7

1. Setup and Operation

7

TV Controls, continued

TV Control Panel

Buttons on the control panel duplicate some keys on the remote control.

Refer to lower labels when using TV menus or after activating a special function.

Refer to upper labels when no TV menus are dis- played.

SYSTEM RESET. If the TV does not respond to the remote control, control-panel buttons, or will not power on/off, press and hold the POWER button on the control panel for ten seconds.

STATUS POWER

65” or 73” TV: Open cover to use buttons on the front panel.

INPUT

Typical control panel.

The STATUS Indicator

Key

Off

Steady On

 

Slow Blinking

Fast Blinking

 

 

 

LED Color

TV Condition

 

 

 

None

TV is powered off. Normal operation.

 

 

 

 

Green

TV is powered on. Normal operation.

 

 

 

 

Green

TV powered off, auto-on TV Timer is set.

Normal operation. TV can be turned on at any time.

 

 

 

Green

TV just powered off and lamp is cooling.

Sixty seconds after turning off TV, LED will start to blink. TV can be turned back on before blinking

 

 

starts or after blinking stops, but not while the indicator is blinking. Normal operation.

 

 

Amber

TV is too hot. The TV will shut off if it overheats.

 

 

Ambient room temperature may be too high. Turn off the TV and let the room temperature drop.

Clear blocked air vents. Ensure at least a four-inch clearance on all sides of the TV.

Amber

Lamp access door is not secure or no lamp installed.

TV will not operate until lamp access door is secured. See Appendix A.

 

 

 

Red

Lamp failure. Replace the lamp. See Appendix A.

 

 

 

Red/

TV may require service.

 

Amber

• Hold power button on front panel for 10 seconds to reset TV.

 

• If LED continues to flash red and amber after reset, turn off the TV and unplug it from the AC

 

power source. Wait one minute and then plug the set back in.

 

• If LED continues to flash red and amber, go to www.mitsubishi-tv.com or call 1-800-332-2119 to

 

receive Authorized Service Center information.

 

You may be asked to count how many times the LED flashes each color to aid in troubleshooting.

For assistance call 1(800) 332-2119

Image 7
Contents Series C10 Series TV Model Stand Model Stand RequirementContents Outdoor Antenna Grounding Replacement PartsFirst-Time Power-On Installing the Remote Control BatteriesPackage Contents Before You Power on the TVTV Controls Remote ControlSound Analog Listen To menu TV Control Panel Status Indicator65 or 73 TV Open cover to use buttons on the front panel Using an External Sound System Picture SettingsTV Inputs Sample Uses of the Format Key Using the Format KeyTV Signals and Display Formats Format Key and Picture ShapeFavorites Menu TV Signals and Display FormatsFavorite Channels Remote Control FAV Favorite ChannelsComputer Video Adjustments Connecting a Computer to the TVImage Resolution Computer Display Formats Using the TV with a Personal ComputerSignal Definitions Status DisplayTo Watch Regular non-3D Video Initial Setup3D Video Watching 3D VideoEpilepsy 3D Safety RequirementsConnection Panel Surround Sound Connection Types and Audio/Video QualityConnection Types Picture QualityCable Satellite Hdmi DeviceDVI Video Device Composite Video DeviceOlder cable box Antenna or Cable TV ServiceReceiver with Coaxial Input Antenna Direct cable no cable boxReceiver with Hdmi Output Picture Picture SettingsFilm Mode Reset PictureSound SetupClock Timer3D Mode Screen SaverChanging the Channel Source ChannelsFavorites Editing the Channel ListRatings Lock LocksAdditive Scan Adding a ChannelBlock Unrated Shows TV-YImportant Notes on Rating Locks Movie RatingsControl Panel Lock Channel LocksChange PIN Ordering a New Lamp Lamp-Cartridge ReplacementAppendix a TV Care LampDisposal of the Old Lamp Cartridge Lamp-Cartridge ReplacementInstalling the New Lamp Cartridge Removing the Old Lamp CartridgeCare of the Remote Control Cleaning RecommendationsTV Reset Comparison Guide Appendix B TroubleshootingGeneral TV Operation Symptom Remarks System ResetReset All Reset AllAmber light on the front panel is lit TV Power On/Off Symptom RemarksPicture Symptom Remarks Green light on the front panel is blinkingTrademark and License Information Sound Symptom RemarksMitsubishi TV Software GNU General Public License Version 3, 29 June No WarrantyAdditional Terms Mitsubishi Home-Theater Television Limited Warranty Warranty39 System Reset MDEAservice@mdea.com

C10 SERIES specifications

Mitsumi Electric, a pioneer in electronic components, has engineered the C10 Series, which stands out for its impressive performance and innovative features. This series represents a leap forward in technology, designed to meet the demands of modern electronic devices, including gaming consoles, consumer electronics, and industrial applications.

One of the primary features of the C10 Series is its compact design. This series has been created with space efficiency in mind, allowing manufacturers to integrate these components into devices without compromising on performance. Despite their small size, the C10 series components are robust, contributing to the overall durability and reliability of end products.

The C10 Series also boasts exceptional energy efficiency. Utilizing advanced technologies, these components consume minimal power while delivering high performance. This feature is particularly beneficial for battery-operated devices, where extended battery life is a critical factor for user satisfaction. By minimizing power consumption, the C10 Series helps manufacturers meet sustainability goals while also enhancing user experience.

Another standout characteristic of the C10 Series is its high-speed data transmission capabilities. This series employs cutting-edge communication protocols and technologies that ensure swift and reliable data exchange between devices. This capability is essential for applications requiring real-time data processing, such as in gaming, multimedia, and industrial automation.

Mitsumi has also incorporated advanced safety features into the C10 Series. These components come with built-in protection mechanisms to prevent overheating and overcurrent, ensuring that devices operate within safe parameters. This safety aspect is crucial for maintaining the longevity of electronic devices and protecting sensitive electronic circuits.

In terms of versatility, the C10 Series is designed to support a range of applications. Its compatibility with various electronic systems makes it suitable for use in automotive electronics, IoT devices, and telecommunications. This adaptability allows manufacturers to utilize the C10 Series across different projects, streamlining production processes and reducing the need for multiple component types.

The C10 Series is a testament to Mitsumi’s commitment to innovation and quality in the electronic components sector. With its combination of compact design, energy efficiency, high-speed capabilities, and robust safety features, the C10 Series is well-equipped to meet the evolving needs of the electronics industry, paving the way for a new era of technology integration.