Kramer Electronics C-AFDM Technical Specifications, Includes the technical specifications

Page 8

Technical Specifications

5 Technical Specifications

Table 1 includes the technical specifications:

Table 1: Optical All-Fiber DVI Technical Specifications1

Compliance with DVI Standard:

Supports DVI1.0 and DDC2B, fully implemented by fiber-optic

 

communication, HDCP compatible

Extension Limit:

500m (>1,650 feet) for WUXGA (1920 x 1200) at 60Hz refresh rate

Resolution:

Up to WUXGA at 60Hz

Pure 8 Strands Fiber Optic Cable:

Riser Jacket of retardant PVC employing 8 strands

Tensile Load:

600N (cable only)

Minimum Bend Radius:

12.0cm

Outer Diameter of Cable:

5.5cm

Dimensions:

3.9cm x 1.54cm x 5.3cm (W, D, H)

Power Source:

Receiver: 5 VDC, <500mA; Transmitter: 5 VDC, <500mA

Clamping Strength to Cable:

14kgf

Operating Temperature:

0°C to 50°C

Storage Temperature:

-30°C to 70°C

Humidity:

10% to 85%

1 Specifications are subject to change without notice

6

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Optical All-Fiber DVI Cable Model Contents TablesIntroduction Ordering InformationGetting Started OverviewSystem Requirements for Setup Hardware Optical All-Fiber DVI CableUsing Your Optical All-Fiber DVI Cable Installing Your Optical All-Fiber DVI CableAvoiding Pitfalls using the Optical All-Fiber DVI Cable Technical Specifications Includes the technical specificationsOnly the first purchase customer may enforce this warranty 2900-000149 REV
Top Page Image Contents