Kramer Electronics 621T user manual Turn the power on the source and the display to on

Page 12

4. Carefully recheck the polarities and ensure that the duplex connectors are

!

fully engaged.

Do not look directly into the LC receptacles of the 621T, while powered on, although this product is regulated strictly enough to operate under the Laser Class 1, classified by CDRH/FDA for eye safety.

5.Connect the DDC RJ-45C connector on the 621T to the DDC RJ-45C connector on the 621R, via UTP cabling (see Section 5.3).

6.Connect the 12V 2.1A DC power adapter to the power socket of either the 621T or the 621R and connect the adapter to the mains electricity (not

shown).

Alternatively, connect the separate power supplies to the transmitter and to the receiver simultaneously.

7.Turn the power on the source and the display to ON.

Figure 4: Connecting the 621T, 621R DVI Optical Transmitter/Receiver

621T, 621R - Connecting and Operating the 621T, 621R

9

 

 

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 621T Page Figures Introduction Getting Started Achieving the Best PerformanceSafety Instructions Recycling Kramer ProductsOverview About the Power Connect Feature Using Twisted Pair CableFeature Function Defining the 621T, 621R DVI Optical Transmitter/ReceiverDefining the 621T DVI Optical Transmitter Defining the 621R DVI Optical Receiver 621R DVI Optical ReceiverConnecting and Operating the 621T, 621R Connecting the 621T/621R DVI Optical Transmitter/ReceiverTurn the power on the source and the display to on Wiring the TP Line in / Line OUT RJ-45 Connectors Wire ColorOperating the 621T/621R DVI Optical Transmitter/Receiver Symbol Description RJ-45 pin assignments are as followsTechnical Specifications 621T 621RPage Laser Compliance
Top Page Image Contents