Hyundai H-CMD4005 instruction manual Using the ISO Connector, Function Connector a Connector B

Caution: Do not interchange the connection of the wiring!!!

For some car models you may need to modify wiring of the supplied power cord. Contact your authorized car dealer before installing this unit.

Using the ISO Connector

1.If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated.

2.For connections without the ISO connectors, check the wiring in the vehicle carefully before connecting, incorrect connection may cause serious damage to this unit.

3.Cut the connector, connect the colored leads of the power cord to the car battery as shown in the color code table below for speaker and power cable connections.

		Function
№	Connector A		№	Connector B
1			7	Rear Right(+)---Violet
2			8	Rear Right(-)---Violet /Black Stripe
3			9	Front Right(+)---Gray
4	Battery 12V (+)/yellow		10	Front Right(-)---Gray/Black Stripe
5	Auto Antenna/blue		11	Front Left(+)---White
6			12	Front Left((-)---White/Black Stripe
7	ACC+/red		13	Rear Left(+)---Green
8	Ground/black		14	Rear Left(-)---Green/Black Stripe

8