Sleep Timer Setting
You can set the DVD/CD Receiver to turn off automatically at a specified time.
1.Press SLEEP to set the desired sleep time.
The SLEEP indicator and the sleep time appears in the display window.
2.Each time you press SLEEP the setting changes in the following order.
SLEEP 180 →150 →120→90 →80 → 70 → 60→ 50 → 40 → 30 → 20 →10 →OFF (No display)
Note:
You can check the remaining time before the DVD/CD Receiver turns off.
Press SLEEP. The remaining time appears in the display window.
Dimmer
This function will change the brightness of the display window on the front panel during in
Press the DIMMER repeatedly.
Mute
Press MUTE to mute your unit.
You can mute your unit in order, for example, to answer the telephone, the “MUTE” indicator flashes in the display window.
Selecting input source
You can use VCRs or other units connected to the AV IN or Optical connector. Refer to the Owner’s Manual supplied with the unit for further information on the operation.
Press AUX repeatedly on the remote control to select the desired input source.
Each time you press this button, the mode of the function changes in the following sequence:
AUX : for selecting the analog signal from AUX AUDIO Input (L/R) Connector.
AUX OPT: for selecting the optical digital signal from OPTICAL IN Connector.
AUDIO IN: for selecting the analog signal from AUDIO IN Connector .
Notes
The Optical input function is available only when the sampling frequency of other unit is 32 - 96kHz.
You can also select the input source by pressing FUNC. button on the front panel.
Press and hold this button for about 3 seconds, then press repeatedly to select other function.
XTS/XTS pro
Each time you press XTS pro the setting changes in the following order.
XTS ON → NORMAL → XTS-P ON...
The unique sound quality of the LG Technology creates the optimum sound for you to play the perfect playback of the original sound and to feel the living sound source.
XTS ON
When playing the movie with the weak bass sound relatively to the general music, it enforces the sense of sound at woofer for you to satisfy with. In the mode of 2 CH BYPASS, It creates the high display effect by playing the sound source via the rear speakers same as the front speakers.
Note
The XTS mode is temporarily disabled when changing from
2.1CH to 5.1 CH and it is enabled when changing it to 2.1 CH.
NORMAL
VIRTUAL sound
Press VSM to set the VIRTUAL sound.
Source | Display | Effect | |
2.1 ch. | VIRTUAL | 3D STEREO |
|
5.1 ch | VIRTUAL | Multichannel sound |
|
|
|
|
|
3D STEREO
Realtime 3D positioned sound rendering technology with stereo sources, optimized for stereo speakers. Listeners may experience amazing virtual surround effects with their own multimedia players.
Multichannel sound
The Multichannel sound changes the sound in 5.1 ch into a virtual one in the 10.1 ch so that it provides such a feeling that you listen to the sound simultaneously from the right and left speakers and center speaker.
Sound Mode
You can enjoy surround sound simply by selecting one of the
Press SOUND button repeatedly.
BYPASS → ON STAGE → STUDIO → CLUB → HALL
→THEATER 1 → CHURCH → PL ll MOVIE
→PL ll MUSIC → PL ll MTRX → BYPASS...
Note:
Initial sound mode is BYPASS.
24