20System Setting
AUDIO
5.1 Speaker Setup
Make the following settings for the
1.Press SETUP.
2.Use WSto select AUDIO menu and then press D.
[Speaker]
Select a speaker that you want to adjust. ,,Note
Certain speaker settings are prohibited by the Dolby Digital licensing agreement.
3
System Setting
3.Use WSto select [5.1 Speaker setup] menu and then press D.
4.Press ENTER
The [5.1 Speaker setup] appears.
5.Use ADto select the desired speaker.
6.Adjust options using WSADbuttons.
7.Press RETURN to confirm your selection. Return to the previous menu.
[Size]
Since the speaker settings are fixed, you cannot change the settings.
[Volume]
Press AD to adjust the output level of the selected speaker.
[Distance]
After you connected speakers to your unit, set the Distance between the speakers and your listening point if the distance of Center or Rear speakers is bigger than the distance of Front speakers. This allows the sound from each speaker to reach the listener at the same time. Press AD to adjust the Distance of the selected speaker. This distance is equivalent to a difference of the distance between Center or Rear speaker and Front speakers.
[Test]
Press AD to test the signals of each speaker. Adjust the volume to match the volume of test signals memorized in the system.
�� 2:49:10