LG Electronics DVB418 owner manual Speaker Setup

Reference

This chapter includes important reference information to help you set your DVD player.

Speaker Setup

Make the following settings for the built-in 5.1 channel surround decoder.

AUDIO

Speaker	Front L
Size
	Large
Volume		dB
	0
Distance		m(ft)
	0.6(2)
Test
	Off
	Select	Move	Return	Enter

1.Press SETUP. The setup menu appears.

2.Use v / V to select the AUDIO option then press B to move to the second level.

3.Use v / V to select the Speaker Setup option then press B to move to the third level. “Select” is highlighted.

4.Press ENTER and 5.1 Speaker Setup menu appears.

5.Use b / B to select the desired speaker.

6.Adjust options using v / V / b / B buttons.

7.Press ENTER to confirm your selection. Returns to the previous menu.

Speaker selection

Select a speaker that you want to adjust. (Front speakers (Left), Center Speaker, Front speakers (Right), Rear speakers (Right), Rear speakers (Left), or SubWoofer)

Size

Press b / B to set a mode. (Large, Small or None)

If you have connected the system to a speaker with a low frequency of 100Hz or below, select “Large.”

If you have connected the system to a speaker without a low frequency of 100Hz or below, select “Small.” If you have not connected a subwoofer, always select “Large” for Front speaker (L/R).

When you do not have a certain speaker connected, select “None.”

Front L/R speaker’s size can be set to “Large” or “Small.”

If Front L/R speaker’s size is set to “Small,” Rear and Center speaker’s size can be set to “Small” or “None.”

Subwoofer’s size can be set only to “Large” or “None”.

Volume

Press b / B to adjust the output level of the selected speaker. (-10dB - 0dB)

Distance

If you connected speakers to your DVD Player, setting the Distance lets the speakers know how far the sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the listener at the same time.

Press b / B to adjust the Distance of the selected speaker.

[0.3m(1ft) - 6.0m(20ft)]

Test

Press b / B to test the signals of each speaker. Adjust the volume to match the volume of test signals memorized in the system.

Front Left (L) → Center → Front Right (R)

→Rear Left (R) → Rear Right (L) → SubWoofer

You can adjust the volume during operating the test tone, first use v / V to select Volume or Speaker option then use b / B buttons to select volume or speaker, so that all speaker’s volume is same from the listener’s position.

During operating the test tone, if you adjust the volume, it will be paused in the current speaker channel.

Reference

31