Identification of Controls
Main Unit
a
b
c
d
e
f g
a LCD screen
bSpeaker
cLCD MODE: NORMAL → 4:3 mode → OFF
dFunction Buttons
•DISPLAY: Accesses
•MODE: Selects a mode among DISC, AV IN or USB.
•SETUP: Accesses or removes setup menu.
•MENU: Accesses menu on a DVD disc.
•COLOR/BRIGHT: Selects the mode of LCD adjustment Brightness → Color → OFF
•FLIP: Rotates the screen.
e Menu Control Buttons
•b B v V (left/right/up/down): Selects an item in the menu.
•b B: Adjusts the COLOR/BRIGHT.
•ENTER: Confirms menu selection.
f Disc Lid
g OPEN button: Push this button to open the Disc lid.
Touch Pad Operation
The buttons from c to e are touch pad type button that is operated with brief touch.
When you operate the button on the touch pad, you should fol- low the directions as below.
1.Touch the ENTER button on the touch pad to light up the e buttons.
2.Touch a button you want to operate. The e buttons will be off in 10 seconds after the operation.
Precautions in using the touch pad
•The LEDs on the touch pad lights only when the power of the unit is on.
•Use the touch pad with clean and dry hands.
•Do not press the button on the touch pad with too much force.
•Do not touch the button on the touch pad with any conductive material.
Introduction
9