Displaying Disc Information on-screen

You can display various information about the disc loaded on-screen.

1.Press DISPLAY to show various playback information.

The items displayed differ depending on the disc type or playing status.

1 / 3

1 / 12

0:20:09

ABC	1 ENG

1 / 1

3D SUR.

2.You can select an item by pressing v / V and change or select the setting by pressing b / B.

Title (Track) – Current title (or track). number/total number of titles (or tracks). Chapter – Current chapter number/total number of chapters.

Time – Elapsed playing time.

Audio – Selected audio language or channel. Subtitle – Selected subtitle.

Angle – Selected angle/total number of angles. Sound – Selected sound mode.

Note:

If no button is pressed for a few seconds, the on- screen display disappears.

Initial Settings

By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 13 to 15.

To display and exit the Menu:

Press SETUP to display the menu. A second press of SETUP will take you back to initial screen.

To go to the next level:

Press B on the remote control.

To go back to the previous level:

Press b on the remote control.

General Operation

1. Press SETUP. The Setup menu appears.

2.Use v / V to select the desired option then press B to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s).

3.Use v / V to select the second desired option then press B to move to the third level.

4.Use v / V to select the desired setting then press ENTER to confirm your selection. Some items require additional steps.

5.Press SETUP or PLAY to exit the Setup menu.