14Connecting
Video Connection | Resolution Setting |
Connect the VIDEO OUT jack on the unit to the video in jack on the TV by using a video cable.
You can hear the sound through the system’s speakers.
2
Connecting
The unit provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu.
1.Press nHOME.
2.Use ADto select the [Setup] and press b ENTER. The [Setup] menu appears.
3.Use WSto select [Display] option then press Dto move to the second level.
4.Use WSto select the [Resolution] option then press Dto move to the third level.
5.Use WSto select the desired resolution then press bENTER to confirm your selection.
,,Note
If your TV does not accept the resolution you have set on the player, you can set resolution to 480p (or 576p) as follows:
Press ZSTOP for more than 5 seconds.
Video Output Resolution
Displayed resolution in display window and outputted resolution may different according to connection type.
[HDMI OUT]: 1080p, 1080i, 720p and 480p (or 576p) and 480i (or 576i)
[COMPONENT VIDEO OUT]: 480p (or 576p) and 480i (or 576i)
[VIDEO OUT]: 480i (or 576i)