LG Electronics BD550 Controlling a TV with the Supplied Remote Control, By pressing You can

Appendix 69

7 Appendix

Controlling a TV with the Supplied Remote Control

You can control your TV using the buttons below.

By pressing	You can
1 (TV POWER)	Turn the TV on or off.
	Switch the TV’s input
AV/INPUT	source between the TV
	and other input sources.
	Scan up or down
PR/CH U/u	through memorized
	channels.
VOL +/–	Adjust the volume of
	the TV

NOTE

Depending on the unit being connected, you may not be able to control your TV using some of the buttons.

Setting up the remote to control your TV

You can operate your TV with the supplied remote control.

If your TV is listed in the table below, set the appropriate manufacturer code.

1.While holding down 1 (TV POWER) button, and press the manufacturer code for your TV with the numerical buttons (see the table below).

Manufacturer	Code Number
LG	1(Default), 2
Zenith	1, 3, 4
GoldStar	1, 2
Samsung	6, 7
Sony	8, 9
Hitachi	4

2.Release the 1 (TV POWER) button to complete setting.

Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code. When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again.

7

Appendix

BD561-N-BUSALLK-ENG.indd 69 2010.1.6 11:19:31 AM