LG Electronics RU-48SZ40 owner manual VCR Connections

VCR Connections

1	Locate the Antenna jack on the
	back of your TV. Connect this to
	RF out jack on the back of your
	VCR.
	Or, find the composite video and
	audio jacks on the back of your
	VCR, and connect them following
	the instructions provided with
	your equipment.
	You may connect either the com-
	posite video or the S-Video cables
	to your TV. (Do not connect both
	the composite and the S- Video
	cables. In the event that you con-
	nect both composite and the S-
	Video cables, only the S-Video will
	work.)

Cable TV
Wall Jack Panel
	Antenna
	Round Wire
RF Coaxial Wire	(75 ohm)
(75 ohm)

ANT IN +75 Ω

S-VIDEO

Back AV Panel

MONITOR	VIDEO	VIDEO
OUT	INPUT 2	INPUT 1

Output	In
3 4 Switch

Out

Audio Video S-Video

L R

VCR

MONO

A/V cables not included with TV

VIDEO

(L)

AUDIO

(R)

To hear stereo sound from cable or your VCR, you will need to connect A/V cables as well as the wire that runs from the VCR to your TV.

If you want to receive your signals on Channel 3 or 4, locate the Out to TV jack on your VCR. Connect a cable from the Out to TV jack to the Antenna In jack on the back of your TV.

After connecting external equipment to the TV, don’t display a still picture for a long time on the screen. Doing so may damage the TV screen.

P A G E 1 1

Downloaded from www.Manualslib.com manuals search engine