Turning the Power ON/OFF, Tuning the TV Channels

TURNING THE POWER ON/OFF

MThe following describes how to turn the TV on/off using the main switch and the remote control.

Turning the power on/off

TURNING THE POWER ON/OFF

The following describes how to turn the TV on/off using the main switch and the remote control.

< To turn the power on/off >

1.Press the main power switch.

The power indicator lit up red or amber.

In displays the standby mode that the power indicator lit up red.

2.If no picture appears, press the “POWER ON/OFF, PR y/x, direct select buttons(0~9)”. By pressing the number(one digit only) where the program you want to watch is preset, you can turn on the set program selection at the same time. When the TV is on, the power indicator will lit up amber.

M When the remote control is not at hand, you can turn on the set by pressing the PR y/x and standby / on buttons on the TV set.

3. Adjust the sound volume with the C/B buttons in receiver or remote control.

4. To switch to the standby mode, press the POWER ON/OFF button. At the same time the power indicator is lit up red.

5. To turn off completely, press the main power switch. At the same time the power indicator is turned off.

MIf you don’t use the TV set for a long time, turn off completely by

using the main power switch on the TV set. You can decrease unnecessary power consumption.

MWhen you turn off completely by using the main power switch, Sleep Time and Timer setting are cleared.

AUTO-POWER-OFF

If TV broadcast for a day is finished, the TV will automatically turn off after about 30 minutes. However, if the Off -time or Sleep time is operating, it takes precedence. This Auto-Power-Off feature does not operate in the VIDEO mode.

LAST-MODE-MEMORY

Settings of picture and sound conditions and preset programs are stored in the memory even after turning off the power, therefore, next time the power is turned on, the system will function in the last setting modes.

TUNING THE TV CHANNELS

Auto setup system

AUTO SETUP SYSTEM

1. Press the MENU button to select to INSTALL.

2. Press the C/B buttons and then

INSTALL SYSTEM.

3. Select AUTO SETUP with the PRy/x buttons and the C/B buttons to start AUTO SETUP.

M NOTE

Press the C/B buttons and keep it pressing for 2seconds, the AUTO SETUP will be started.

4. Please wait until the EDIT menu appears.

MWarning

This television has been factory pretuned to channels 2, 7, 9, 10 and 28. If the auto search function is activated, these preset channels will be deleted and new channels tuned to 1, 2, 3 ETC..

TILT

When the TILT is selected, the screen will be tilted.

If the picture is tilted, please adjust by using following steps.

1. Press the MENU button to select

INSTALL.

2. Press the PRy/x buttons and then INSTALL SYSTEM.

3. Select TILT with PRy/x buttons and C/B buttons to change the TILT value.