Troubleshooting
Symptom |
| Possible Cause | Correction |
|
|
|
|
No power. | • | The power cord is disconnected. | • Plug the power cord into the wall outlet |
|
|
| securely. |
|
|
|
|
The power is on, but the | • | No disc is inserted. | • Insert a disc. (Check that the DVD or |
DVD player does not |
|
| audio CD indicator in the display |
work. |
|
| window is lit.) |
|
|
|
|
No picture. | • | The TV is not set to receive DVD signal | • Select the appropriate video input mode on |
|
| output. | the TV. |
|
|
| |
| • The video cable is not connected | • Connect the video cable securely. | |
|
| securely. |
|
|
|
|
|
No sound. | • | The equipment connected with the audio | • Select the correct input mode of the audio |
|
| cable is not set to receive DVD signal | receiver so you can listen to the sound |
|
| output. | from the DVD player. |
|
|
| |
| • The power of the equipment connected with | • Turn on the equipment connected with the | |
|
| the audio cable is turned off. | audio cable. |
|
|
| |
| • The AUDIO options are set to the wrong | • Set the Digital Audio Output to the | |
|
| position. | correct position, then turn on the DVD |
|
|
| player again by pressing POWER. |
|
|
|
|
The DVD player does not | • | An unplayable disc is inserted. | • Insert a playable disc. (Check the disc |
start playback. |
|
| type, color system, and regional code.) |
| • | The rating level is set. | • Cancel the rating function or change the |
|
|
| rating level. |
|
|
| |
The remote control does | • The remote control is not pointed at the | • Point the remote control at the remote | |
| remote sensor on the DVD player. | sensor of the DVD player. | |
not work properly. |
| ||
|
|
| |
| • The remote control is too far from the | • Operate the remote control closer to the | |
|
| DVD player. | DVD player. |
|
|
|
|
24