NEC NDRV-60 owner manual Disc Initialize, Disc Finalize, Use b / B to select OK then press Enter

Press ENTER.

Disc Initialize menu appears.

Disc Initialize Disc Finalize Disc Label

Disc Protect

PBC

AutoPlay

Press SETUP.

The Setup menu appears.

Before Operation (Continued)

DISC

Disc Initialize

If you load a completely blank disc, the recorder will ini- tialize the disc.

DVD-R:The recorder initialize the disc to Video mode. The recording mode will always be Video mode. DVD-RW:The recorder initialize the disc to VR mode. DVD+R: The Initialize menu will appears. Select “Yes” then press ENTER.

DVD+RW: The recorder initialize the disc to DVD+RW mode.

Also, you can format the disc from the Setup menu as below.

Start

Disc Finalize

Finalizing ‘fixes’ the recordings in place so that the disc can be played on a regular DVD player or computer equipped with a suitable DVD-ROM drive.

Finalizing a Video mode disc creates a menu screen for navigating the disc. This is accessed by pressing LIST/DISC MENU or TITLE.

Caution

•When DVD-R, DVD-RW, and DVD+R recording, you’ve finalized a disc recording, you can’t edit or record anything else on that disc except DVD+RW.

Disc Initialize
Disc Finalize	Finalize
Disc Label	Unfinalize
Disc Protect
PBC
AutoPlay

1

2Use v / V to select the DISC option.

3 While the DISC option is selected, press B to move to the second level.

4Use v / V to select the Disc Initialize option.

5 Press B to move to the third level. Start icon is highlighted.

6

In case of DVD-RW, use b / B to select a desired

7 Disc Format Mode (VR Mode or Video Mode) then press ENTER.

In case of DVD+RW, go to step 8.

Disc Initialize

Select a mode.

VR Mode Video Mode

Use b / B to select “OK” then press ENTER.

8 It takes a few moments to format the disc.

Disc Initialize

All data on the disc will be deleted.

Proceed?

OKCancel

Caution

If you want to change the disc format, everything recorded on the disc will be erased.

1	Follow steps 1-3 as shown on page 26 (Disc
	Initialize).

2Use v / V to select the Disc Finalize option.

3 Press B to move to the third level. Finalize is highlighted.

Press ENTER.

4 Finalize menu appears.

Finalize

Do you want finalization?

OK Cancel

5The recorder starts finalizing the disc.Select OK then press ENTER.

ote

How long finalization takes depends on the type of disc, how much is recorded on the disc, and the number of titles on the disc. A disc recorded can take up to 8 min- utes or more to finalize.

ip

If you load a DVD-RW or DVD+RW that has already been finalized, you can ‘unfinalize’ it by choosing Unfinalize from the Finalize menu. After doing this, you can edit and re-record onto the disc.

26