Optoma Technology Home Theatre Projector Power on Standby Brite mode, Enter, Shift, Demo

￿ser ￿ontrols

Using the Remote Control

Power on

Standby

Brite mode

IRIS

ISF Day/ISF

Night/User1/

User2/User3

Gamma

Edge enhance

Color vivid

B/W Extension

Four Direc- tional Select Keys

Power on the projector. Refer to the “Power On the Projector” section on pages 21-22.

Power off the projector. Refer to the “Power Off the Projector” section on pages 21-22.

Increase the brightness of the image.

Refer to “IRIS” function on page 44 for more information.

Select the display mode. Refer to “Image--> Mode” section on page 32.

There are 10 preset gamma curves. After the initial setup and fine tuning is completed, utilize the Gamma Adjustment steps to optimize your image output.

There are 5 pre-set modes and one user mode for advanced edge enhancement filter. You can easily switch between the modes to achieve different effects.

There are 3 preset color management set- tings and one user definable setting. You can easily switch between the modes to achieve different effects.

Black and White Extension can stretch the black and white levels to automatically increase the contrast of input image.

Use to select items or make ad- justments to your selection.

Enter	Confirm your item selection.
Menu	Press “Menu” to launch the on-screen
	display (OSD) menu. To exit OSD, press
	“Menu” again.
V. Shift	Shifts the projected image position verti-
	cally.
Demo	This function provides the user with a pre-
	view window where settings such as Edge
	Enhancement, Colour Vividness and B/W
	Extension can be viewed.

26