NEC S461AVT, S401AVT Operating Range for the Remote Control, Handling the remote control

Page 13

REMOTE ID button

Activates REMOTE ID function.

MTS button*

AUDIO INPUT button

Selects audio input source [IN1], [IN2], [IN3], [HDMI], [DPORT], [TV]*1, [OPTION]*1.

button

Activates closed captioning.

Note: VIDEO1, VIDEO2, S-VIDEO inputs only.

*: This buttonÕs action depends on which option board you use. Refer to the option boardÕs manual for further information.

*1: The product you purchased may not have this feature.

Operating Range for the Remote

Control

English

 

Point the top of the remote control toward the LCD monitorÕs

 

remote sensor during button operation.

 

Use the remote control within a distance of about 7 m (23 ft.)

 

from remote control sensor or at a horizontal and vertical

 

angle of within 30¡ within a distance of about 3.5 m (10 ft.).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Caution: Important, the remote control system may not function when direct sunlight or strong illumination strikes the remote control sensor or when there is an object in the path.

Handling the remote control

¥Do not subject to strong shock.

¥Do not allow water or other liquid to splash the remote control. If the remote control gets wet, wipe it dry immediately.

¥Avoid exposure to heat and steam.

¥Other than to install the batteries, do not open the remote control.

English-11

Image 13
Contents MultiSync S401 MultiSync S461 Advanced Option IndexFCC Information Canadian Department of Communications Compliance StatementEnglish-1 Declaration Important InformationDeclaration of the Manufacturer English-2Cleaning the Cabinet Cleaning the LCD PanelRecommended Use ErgonomicsContents Installation Attach Mounting Accessories Attaching Mounting AccessoriesUsing optional table top stand Ventilation RequirementsControl Panel Parts Name and FunctionsAmbient Light Sensor DVI in DVI-D Terminal PanelRGB/HV OUT BNC Audio OUTExternal Speaker Terminal Kensington LockOption board slot English-9Keypad Wireless Remote ControlHandling the remote control Operating Range for the Remote ControlDetermine the installation location SetupInstall the remote control batteries Connect the supplied power cordAdjust the sound Switch on the power of all the attached external equipmentAdjust the screen See pages 20 Adjust the image SeeConnections Wiring DiagramBefore making connections English-14Connecting a DVD Player with Hdmi out Connecting a Personal ComputerConnecting a Computer with DisplayPort English-15Basic Operation Power on and OFF ModesEnglish-16 OFFUsing Power Management Power IndicatorSelecting a video source Picture AspectAmbient Mode Picture ModeAmbient parameter setting Information OSDEnglish-19 OSD On-Screen-Display ControlsEnglish-20 English-21 English-22 English-23 English-24 English-25 Recommendations Image Sticking of LCD PanelEnglish-26 Remote Control ID Remote Control FunctionTo SET Remote Control ID To SET/RESET Remote Control ModeEnglish-28 Wired Remote Control FunctionInout English-29 ConnectionNetwork Setting by Using an Http Browser Connecting to a NetworkControlling the LCD monitor via LAN Control OverviewPreparation Before Use Network SettingsHandling of the Address for Operation via a Browser English-31English-32 Alert Mail SettingEnglish-33 FeaturesTroubleshooting Product Specifications Specifications S401English-35 English-36 Specifications S461English-37 Pin AssignmentRXD TXD GNDDisposing of your old NEC product Manufacturer’s Recycling and Energy InformationEnergy Saving Weee Mark European Directive 2002/96/EC