NEC Control Codes, Cable Connection, P42XP10-BK Installation Guide, 42” Plasma Monitor

NEC Display Solutions of America, Inc.

P42XP10-BK Installation Guide

42” Plasma Monitor

Rev 1.2

Control Codes

Function		Code Data	31	03 18 0D
POWER	ON	01 30 2A 30 41 30 43 02 43 32 30 33 44 36 30 30 30
	OFF	01 30 2A 30 41 30 43 02 43 32 30 33 44 36 30 30 30	34	03 1D 0D
INPUT SWITCH	RGB1 (15pin HD)	01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 31 03	18	0D
	RGBHV	01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 32 03	1B 0D
	DVI	01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 33 03	1A 0D
	DVD3/HD3 (HDMI)	01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 34 03	1D 0D
	VIDEO1	01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 35 03	1C 0D
	VIDEO2	01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 36 03	1F 0D
	S-Video	01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 37 03	1E 0D
	DVD1/HD1	01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 43 03	6A 0D
	DVD2/HD2	01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 44 03	6D 0D
AUDIO MUTE	ON	01 30 2A 30 45 30 41 02 30 30 38 44 30 30 30 31 03	62	0D
	OFF	01 30 2A 30 45 30 41 02 30 30 38 44 30 30 30 30 03	63	0D
PICTURE MODE	BRIGHT	01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 33 03	6E 0D
	STANDARD	01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 34 03	69	0D
	CINEMA1	01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 35 03	68	0D
	CINEMA2	01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 42 03	1F 0D
	DEFAULT	01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 43 03	1E 0D
SCREEN MODE:	NORMAL	01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 31 03	1B 0D
	FULL	01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 32 03	18	0D
	ZOOM	01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 33 03	19	0D
	DYNAMIC	01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 34 03	1E 0D
	2.35:1	01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 42 03	68	0D
	14:9	01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 43 03	69	0D
	UNDERSCAN	01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 44 03	6E 0D
	TRUE	01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 45 03	6F 0D
AUTO PICTURE	ON	01 30 2A 30 45 30 41 02 30 30 31 45 30 30 30 31 03	6A 0D
	OFF	01 30 2A 30 45 30 41 02 30 30 31 45 30 30 30 30 03	6B 0D
FILM MODE	ON	01 30 2A 30 45 30 41 02 30 32 32 33 30 30 30 32 03	1E 0D
	OFF	01 30 2A 30 45 30 41 02 30 32 32 33 30 30 30 31 03	1D 0D

NOTE: Contact your NEC rep for codes not listed.

NOTE: Use a cross/reverse/null modem cable.

Cable Connection

Communication Protocol:

Interface:	RS-232C	Parity:	None
Communication:	Asynchronous	Stop Bit:	1 bit
Baud Rate:	9600 bps	Communication Code: ASCII
Data Length:	8 bits

PC Control Connector (D-Sub 9P)

NOTE: If so desired, jumper “Request to send” and “Clear to Send” together on both ends of the cable to simplify cable connection. These connections are not required. The only connections required are pins 2 (RxD), 3 (TxD) and 5 (GND).

www.necdisplay.com P42XP10-BK Page 10 of 10