NEC 75F, 95F user manual Monitor AccuSync 75F Specifications

Specifications –continued

Monitor		AccuSync™ 75F	Notes
Specifications		Monitor
Picture Tube	Diagonal:	17 inch	90° deflection, 0.24-0.28 mm variable
Viewable Image Size:		16.0 inch	(diagonal) flat dot pitch, 0.20-0.25 mm
			variable (horizontal) flat dot pitch,
			medium short persistence phosphor,
			multi-layered, anti-static screen coating,
			semi-tint screen, Invar Shadow Mask and
			OptiClear® screen.
Input Signal	Video:	ANALOG 0.7 Vp-p/75 Ohms
	Sync:	Separate sync. TTL Level
		Horizontal sync. Positive/Negative
		Vertical sync. Positive/Negative
Display Colors	Analog input:	Unlimited number of Colors	Depends on display card used.
Synchronization	Horizontal:	31 kHz to 70 kHz	Automatically
Range	Vertical:	55 Hz to 120 Hz	Automatically
Resolutions Supported		640 x 480 @ 60 to 120 Hz	Some systems may not support
Resolution based on horizontal and		800 x 600 @ 55 to 110 Hz	all modes listed.
vertical frequencies only		832 x 624 @ 55 to 106 Hz
		1024 x 768 @ 55 to 87 Hz ....................... NEC-Mitsubishi Electronics Display cites
		1152 x 870 @ 55 to 77 Hz	recommended resolution at
		1280 x 1024 @ 55 to 66 Hz	85 Hz for optimal display performance.
Active Display Area	Horizontal:	310 mm/12.2 inches	Dependent upon signal timing used,
(Factory Setting)	Vertical:	232 mm/9.1 inches	and does not include border area.
Active Display Area		325 mm/12.8 inches	Dependent upon signal timing used,
(Full Scan)		244 mm/9.6 inches	and does not include border area.
Power Supply		AC 100 – 240 V, 50-60 Hz
Current Rating		1.5A @ 100 – 240 V
Dimensions		403 mm (W) x 420 mm (H) x 420 mm (D)
		15.9 inches (W) x 16.5 inches (H) x 16.5 inches (D)
Weight		16.7 kg
		36.8 lbs
Environmental Considerations
Operating Temperature:		0°C to +35°C
	Humidity:	30% to 80%
	Feet:	0 to 10,000 Feet
Storage Temperature:		-20°C to +60°C
	Humidity:	10% to 90%
	Feet:	0 to 45,000 Feet

NOTE: Technical specifications are subject to change without notice.

9

AS75/95F.p65 11 11/2/00, 10:48 AM