Other Remote Control Features, Tape Handling

Instruction ManualManual

VCR FUNCTIONS(continued)

Other Remote Control Features

A-B

During tape playback, press the key once. The player will memorize the beginning of a segment (point A) and continue to play. Press it again. The combo will memorize the end of a segment (point B). At the same time, it will return to point A and start to repeat playback of the selected segment (A-B). After repeating playback of the segment five times, the player will resume to normal playback from point B.

SKIP

Each time you press the key during tape playback, the tape skips forward by 30 seconds, and then returns to normal playback.

PAUSE/STEP

During recording (except timer recording), pressing the key pauses recording until you press it again. The player continues to record at the location where the taped is paused.

During tape playback, the key does not function. During still playback, pressing the key will make pictures advance frame by frame. The still function will be released if there is no operation for 5 minutes. The VCR will change to the STOP mode.

F.ADV (Frame advance): Each time you press the key during still playback, the picture advances one frame. Press the PLAY/PAUSE key to resume normal playback.

Tape Handling

1.Do not use damaged or defective tapes. Faulty tapes may cause damage to the VCR play heads and mechanism. Do not use video tapes with the following conditions.

-Tapes with mold

-Tapes stained with liquids, debris or other substances -Tapes with crinkles, snags or breaks -Disassembled tapes

2.Moisture condensation may occur in tape. Moisture condensation damages the tape. Please use the tape after the moisture condensation has disappeared.

3.After use, store tape vertically in a case to prevent loose.

4.Do not store tapes in places with the following conditions: -High temperature and humidity

-Areas subject generation of mold -Areas in direct sunlight

-Areas subject to dust and dirt

-Near strong magnetic materials such as speakers