Polaroid PDV-0701A operation manual Troubleshooting, Symptom What to Check

Troubleshooting

SYMPTOM	WHAT TO CHECK
	- make sure the disc cover is closed.
	- make sure a disc is loaded.
	- make sure the disc isn’t loaded upside down.
	- disc should be clean, not dirty or warped.
The player cannot play.	- player’s region code should be the same as region
	code of DVD disc.
	- has water condensation occurred? If it has,
	remove the disc and keep the player powered up for
	at least two hours.
	- make sure system connection is correct.
There is no sound.	- make sure the speakers are turned on.
	- make sure the sound setup of DVD disc is correct.
	- is your disc dirty or warped? Clean or replace disc.
There is no picture.	- make sure TV is on and in correct video mode.
	- make sure your system connection is correct.
Poor AV performance.	- is your disc dirty or warped? Clean or replace disc.
Cannot continue to play and	- make sure the player is not in A-B repeat status.
	- press A-B button to cancel it A-B repeat status.
play a section repeatedly.
	- is your disc dirty or warped? Clean or replace disc.

WARNING: Do not touch any metal objects to the battery connectors, as it will put the battery in standby mode. To get out of standby mode please connect the battery and portable DVD player to AC or DC power.

Others possibilities:

Static or other external interference may cause the player to function abnormally. In this circumstance unplug the power-supply cord from the outlet and plug it in again to reset the player so that normal operation can resume. If you are still having problems, then please disconnect the power and consult your service center or a qualified technician.

- 26 -