Hitachi 61UWX10B Component Y-PBPRInputs, Rear Speaker Output Terminals, Optical Input

REAR PANEL JACKS

fComponent: Y-PBPRInputs

Inputs 4 and 5 provide Y-PBPRjacks for connecting equipment with this capability, such as a DVD player or Set Top Box. You may use standard video signal for INPUT:4 and 5.

Items g ~ j are for 53/61SWX10B and 53/61SWX12B only.

gREAR SPEAKER Output Terminals

These terminals are used to connect external speakers, which are used for the surround sound feature. The volume level is controlled by the televisionÕs main volume. These speaker output terminals can be turned on and off in the THEATER-SPEAKER SETUP menu. Use speakers with 8-Ohm impedance only.

jSUB WOOFER Output

This jack provides variable audio output to a sub-woofer accessory. With this connection, the audio can be controlled by the televisionÕs main volume. This feature can be turned on and off in the THEATER-SPEAKER SETUP menu.

NOTES: 1. DO NOT connect standard VIDEO and S-VIDEO to Input 1, 2 or 3 at the same time. S-Video has a higher priority over video input.

2.When using the Y-PBPRinput jacks, connect your components audio output to the TVÕs Input 4 or 5 Left and Right Audio input jacks. If your component has a Coaxial Out or Optical Out, use these connectors in place of the standard Audio L/R output jacks.

3.Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y output to the TVÕs PB input and the components R-Y output to the TVÕs PR input.

4.Your component outputs may be labeled Y-CBCR. In this case, connect the component CB output to the TVÕs PB input and the component CR output to the TVÕs PR input.

5.It may be necessary to adjust TINT to obtain optimum picture quality when using the Y-PBPRinputs. (See page 56)

6.To ensure no copyright infringement, the MONITOR OUT output will be abnormal, when using the Y-PBPRjacks.

7.This TVÕs optical digital input jack fully complies with the international standard governing this type of jack (IEC958), and is designed for connection to a Dolby Digital (AC-3 or PCM) DVD Player or Dolby Digital (AC-3 or PCM) HDTV Set Top Box. Older equipment, some of which is not fully compliant with IEC958, may not be compatible with the Dolby Digital bitstream. Such a connection using anything other than Dolby Digital AC-3 or PCM bitstream could create a high noise level, causing damage to your speakers.

12