Polaroid DVP-0600 Usage of the Remote Control, Battery Installation, Service life of Batteries

Page 11

Usage of the Remote Control

Battery Installation

Insert the batteries supplied while observing the correct (+) and ( ￿ ) polarities.

Service life of Batteries

The batteries operation period normally last for about six months, although this depends on how often, or for what operations, the remote control is used.

If the remote control unit fails to work even when it is operated near the player, replace the batteries.

Use new “AAA” batteries.

Notes:

Do not attempt to recharge, short-circuit, disassemble or heat batteries; do not throw them into fire.

Do not drop, step on or otherwise batter the remote control unit. This may damage the parts or lead to a malfunction.

Do not mix old and new batteries.

Wipe away any leakage inside the remote control unit, and install new batteries.

If leakage should come into contact with your skin, immediately wash it off thoroughly with water.

Batteries contain chemical substances and we recommend that you dispose of them properly and in compliance with any local regulations.

Remote Control Operation Range Point the remote control unit from no more than about 23 feet from the remote sensor and within about 60 degrees of the front of the unit.

The operating distance may vary according to the brightness of the room. Notes:

Do not point bright lights at the remote control sensor.

Do not place objects between the remote control unit and the remote control sensor.

Do not use this remote control unit while simultaneously operating on any other equipment.

- 11 -

Image 11
Contents DVD Player Contents Important Safety Instructions Features About Discs Lens cleaner How to hold discsCleaning Care CleaningDisplay Panel Elements of Operation Front PanelRear Panel Video output jack Interlace scan Power-supply cordRemote Control Handset Button Functions Forward Volume Up/DownPause/Step ReverseService life of Batteries Usage of the Remote ControlBattery Installation Connections Connecting to a TV Connection is shown as followingSetup of the DVD Player Pb/Pr connection Cb Cr video connectionConnecting to an Analog Amplifier Connecting to an Amplifier with 5.1 CH Audio Output Connecting to an Amplifier with Dolby Digital Decoder Region Restriction Code region code Disc Play OperationsDVD Playback Menu Title & ChapterCD Playback VolumeZoom of Picture Jpeg PlaybackNormal Playback Picture RotationPlayback Functions Zoom Function Program PlaybackSystem Setup Test Tone Speaker SetupCenter DELAY, Rear Delay Audio Setup Spdif OFF, SPDIF/RAW & SPDIF/PCMTV Type MULTI.SYSTEM, Ntsc & PAL Password ChangeDefaults Reset PreferencesSymptom Check Item to See If TroubleshootingPAL/MULTI/NTSC Specifications