Hitachi 32UDX10S, 36UDX10S manual VCR or Laserdisc Player Hitachi Model or Similar Model

CONNECTING EXTERNAL VIDEO SOURCES

CONNECTING AN S-VIDEO VCR OR LASERDISC PLAYER

1.Connect the cable from the S-VIDEO OUT of the VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown on the TV set below.

2.Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.

3.Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.

4.Press the INPUT button to view the program from the VCR or laserdisc player. The VIDEO icon disappears automatically after approximately eight seconds.

5.Press the INPUT button to return to the previous channel.

Rear Panel of Television

See tips on Page 14

		ANT A
		TO
		CONVERTER
		S-VIDEO	S-VIDEO		S-VIDEO
		ANT B	VIDEO	Y	VIDEO
		VIDEO
		(MONO)	(MONO)	PB/CB	L
		L	L
				PR/CR
R	L	R	R		R
		AUDIO	AUDIO		AUDIO
AUDIO		INPUT 1	INPUT 2		MONITOR
TO HI-FI					OUT

Back of

VCR

S-VIDEO V L R OUTPUT

VCR or Laserdisc Player

Hitachi Model or

Similar Model

NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose.

2.A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output. (INPUT: 1 in example on page 13) Refer to your VCR operating guide for more information on line input- output connections.

18