0335E2new.fm Page 13 Tuesday, April 25, 2000 4:10 PM
Using the Remote to Control VCR and Cable Box Functions
Operating the Precoded Function for Your VCR
This remote is designed to operate different types of VCRs. You must first program the remote to match the remote system in your VCR. (Refer to the VCR Code Index section.)
1.Turn on your VCR.
2.Aim the remote control at the front of your VCR.
3.Press the VCR button to switch to VCR precoded mode.
4.While holding down the VCR button, enter the
5.The remote will now control your VCR.
NOTES:
•If your VCR cannot be operated after performing the above procedures, this means that your VCR codes have not been precoded into the remote.
•In the unlikely event that your VCR cannot be operated after performing the above procedures, consult your VCR operating guide.
•The remote control will remember the codes you have programmed in until the batteries are removed. After replacing the batteries repeat the entire programming procedure stated above.
•If your VCR does not have a power function, the remote will issue the CHANNEL UP function.
POWER TV CABLE VCR
1 2 3 CH
4 5 6 CH
7 8 9 VOL
MUTE 0 
INPUT SLEEP CURSOR
CONTROL MENU 
RECALL
REC STOP | PAUSE | |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TV/VCR tttuu
HITACHI
* (Codes are listed on page 14)
Operating the Precoded Function for Your Cable Box
1.Turn on your cable box.
2.Aim the remote control at the front of your cable box.
3.Press the cable box button to switch to cable box precoded mode.
4.While holding down the CABLE button, enter the
5.The remote will now control your cable box.
NOTES:
•If your cable box cannot be operated after performing the above procedures, this means that your cable box codes have not been precoded into the remote.
•In the unlikely event that your cable box cannot be operated after performing the above procedures, consult your cable box operating guide.
•The remote control will remember the codes you have programmed in until the batteries are removed. After replacing the batteries repeat the entire programming procedure stated above.
•If your cable box does not have a power function, the remote will issue the CHANNEL UP function.
•For some models, the remote
control’s channel 
and 
will control the cable box channel. The number buttons will control your television channel although you are in cable mode.
- 13 -