CONNECTING EXTERNAL SOURCES
The exact arrangement you use to connect the PC, VCR, camcorder, laserdisc player, DVD player, or HDTV Set Top Box to your LCD TV is dependent on the model and features of each component. Check the owner’s manual of each component for the location of video and audio inputs and outputs.
The following connection diagrams are offered as suggestions. However, you may need to modify them to accommodate your particular assortment of components and features. For best performance, video and audio cables should be made from coaxial shielded wire.
CONNECTING A DIGITAL TV ANTENNAS
1.Attach an ATSC antenna cable to the DTV TUNER terminal.
2.Connect the outdoor antenna cable
3.Connect all power sources before activating the LCD TV.
4.Turn on the LCD TV.
5.Press DTV on the remote.
This unit has the ability to receive unscrambled Cable Digital Channels
NOTES: Refer to the owner’s manual of the external equipment to be connected. When connecting external equipment, do not Connect the AC power cords to wall outlets until all other connections are completed.
CONNECTING ANALOG TV CABLE OR ANALOG ANTENNA WITHOUT A TV CABLE BOX
1.Use one of the following two diagrams if you connect to an outdoor antenna.
A:Using a VHF/UHF combination outdoor antenna.
B:Using separate VHF and/or UHF outdoor antennas.
2.Connect all power sources before activating the LCD TV.
3.Turn on the LCD TV.
4.To use the TV, press NTSC on the remote.
AB
NOTES: Ensure that the power cord is inserted correctly to avoid connector damage.
18