Hitachi UT32X802 manual Connection Connect your Equipment to the Monitor, Auto Input Change

CONNECTION (continued)

2. Connect your Equipment to the Monitor (continued)

Connecting to Equipment Having a HDMI Output Terminal

HDMI-Interfaced System

With “HDMI Control” function, you can interface the connected equipment through the HDMI terminal automatically if the connected equipment meets an industry standard “HDMI CEC (Consumer Electronics Control)”. Please check

if the connected equipment supports HDMI CEC before using this function.

1.Press the button.

2.Select “Function” menu.

3.Select “HDMI Control”.

4.Select “Auto Input Change” or “System Standby”.

Function
	HDMI Control	Off
	Auto Input Change
	System Standby	Off

Select Return Exit

	Off	Condition : while the monitor is in Standby mode.
Auto Input Change		When the connected equipment starts (such as DVD
	On	playback and Disc insertion), the monitor is automatically
		turned On and switches the picture and audio to HDMI input.
System Standby	Off	Condition : while the monitor is On.
		When the monitor is switched off or set to Standby mode, the
	On
		connected equipment is also turned off or in Standby mode.

NOTE

If the HDMI-DVI cable is used, this HDMI-interfaced system is not available.

Connecting to Equipment Having Video Output Terminals

The unit can be connected to equipments having video output using the optional D-sub 15 pin - composite cable.

IN	OUT	[Example]
AUDIO		VCR
(Audio)	or
		DVD player
	*	Set-Top Box
(D-sub 15 Pin)		Camcorder
	* Optional D-sub 15 pin - composite
	cable.
		Home video game system

NOTE

About the connection of D-sub 15 pin, see 13 for details.

19