SETTING UP YOUR DTV
1.Make sure the physical connection is properly connected.
2.Switch on the TV.
3.Select the appropriate external video input on your TV by using the TV remote control.
4.If the PDP is moved to a different location. You should reset the receiver and do the channel scanning all over again.
USING THE DTV ON-SCREEN DISPLAY (OSD) CONTROLS
1.Press DTV MENU on the remote control to display the MENU banner.
2.Use the ▲▼W X to navigate to different menu item.
3.Use the W X to adjust functions.
4.Press OK on the remote control to select functions. Press BACK to jump back the last page of menu.
5.Press EXIT on the remote control to quickly exit from menu.
| Channel | Enter Password | Edit, Auto Scan, Manual Scan | |
| Caption | Font Size | Default, Small, Middle, Large | |
|
| Font Style | Default, Style0~7 | |
|
| Font Color | Background, Foreground | |
|
| Font Opacity | Background, Foreground | |
|
| Edge Style | Default, None, Raised, Depressed, Uniform, Drop_Shadow(L), Drop_Shadow(R) | |
|
| Edge Color | Default, Gray, Blue, Red, Green, Cyan, Yellow, Dark | |
| Setup | Sound | PCM/ Dolby Digital | |
|
| Opacity | 0%~100% adjustment | |
|
| Display Time | ||
|
| Time Zone | Time Format, Time Adjustment | |
|
| About | HW & SW version | |
| Lock | Enter Password | Rating, Password, Reset Default | |
|
|
| Before you can use any of the channel buttons (CH＋/－, FAV. CH, Numbers), the available channels must first | |
| Channel |
| ||
|
| be scanned and memorized. | ||
Auto Scan
Initial Screen –
The first time the receiver is powered on. You will see a message block of “Press (Menu) key and then select Channel to run Auto / Manual Scan”.
1.Press the DTV MENU button to display the MENU banner.
2.Use the arrow keys W or X to move highlight CHANNEL and enter default password “0000” to show three
3.Press ▲ or ▼ buttons to highlight the AUTO SCAN, and then press OK to lunch the auto scan. An
4.Once the digital TV signal is scanned, the channel number and program name will be shown on the “Scan List”.
5.Scanning will end up on channel 69, when it is complete (even in processing) you can press EXIT key to leave this window and enjoy watching DTV programs.
36