Hitachi L42A404 important safety instructions Side Panel Jacks & Controls, Hdmi 3 & Hdmi

Side Panel Jacks & Controls

8 USB/

7 3

(Only L42A404 Model)

6

9

4

5

2

3

1

10

11

FRONT VIEW

USB SERVICE Slot

This USB slot is for future software upgrades.

HEADPHONE Jack

FIRST TIME USE

POWER Button

This button is for turning ON the LCD TV, in order to turn the TV On, the standby indicator must be lit red. If the indicator is off, plug the power cord into the AC outlet.

MENU Button

This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote control. This button also serves as the Return button when in the MENU system.

INPUT Button

Press this button to access the INPUT menu.

VOLUME (+/-) Level

Press these buttons to adjust the sound level. The volume level will be displayed on the TV screen. These buttons also serve as the CURSOR left (◄) and right (►) buttons when in the Menu system.

Use this jack to connect headphones.

POWER LIGHT Indicator

To turn the TV ON, press the POWER button (). A blue indicator lamp located on the lower left corner of the front bezel illuminates to indicate the TV power is ON.

Indicating	Power Sta-	Operating
Lamp	tus
Lights	OFF	When the LCD TV is plugged
Red	(Stand-by)	to the AC outlet.
Lights	ON	TV Power is ON; picture is
Blue		shown.
Quickly		The TV is powering OFF.
	ON	It will soon be in the Off
Blinking Red
		(Stand-by) state.
1 REMOTE CONTROL Sensor

Point your remote control at this area when selecting channels, adjusting volume, etc.

CHANNEL Selector

Press these buttons until the desired channel appears in the
top right corner of the TV screen. These buttons also serve
as the CURSOR down ( ) and up (	) buttons when in the		• Your HITACHI LCD TV will not show any
MENU system.		NOTES
			picture if there is no video input when AV1,
AV2 (SIDE) Jacks			AV2, Component1 or 2, or HDMI 1, 2, 3 or 4 is
			selected. Instead, a message will indicate “No
AV2 input provide composite Video	and S-Video(Only for
			Signal”, and the Power Light will remain Blue
L42A404) jacks for connecting equipment with this capability,
			until the TV is turned off or in Stand-by mode
such as a DVD player , Game Console or Camcorders.
			(lights red) when not in use.
HDMI 3 & HDMI 4			• The remote control can turn the TV ON/OFF
			as well as control various devices and any
Use these side HDMI inputs for AV device such as set			compatible HDMI CEC devices.
top boxes or DVD players equipped with an HDMI output			• Please do not put anything around the remote
connection (see page 14 for reference).			control sensor.

9