Receiver Panel Descriptions

1Equalization Trim Pot

This Trim Pot is used to equalize the incoming HDMI signal to account for variances in CAT cable skew. By default, the Auto EQ feature is enabled and this Trim Pot does not need to be adjusted. In the event that manual EQ mode is enabled, this Trim Pot will be used to equalize the signal.

2HDMI Output Port

Connect an HDMI capable display to this output port.

3Power LED Indicator

This LED will become active once the included 5V DC power supply has been properly connected to the 1:5 Splitter For HDMI Over CAT-5 receiver unit.

4Power LED Indicator

Connect the included 5V DC power adapter between this input port and an available wall power socket.

5RJ-45 DDC Port

A CAT-5, CAT-5e or CAT-6 cable must be connected between the receiver and sender. This cable carries DDC and HDCP data. Most source devices will not operates properly without this data.

6RJ-45 Video Port

A CAT-5, CAT-5e or CAT-6 cable must be connected between the receiver and sender. This cable carries Video and Audio data.