Hitachi UT32A302W manual Contrast Mode, 3D Color Management, Black Enhancement, 3D Comb Filter

SETUP OPERATION (continued)

Watching Images from HDMI/Composite Input (continued)

Setting Picture Adjustment (continued)

Selected Items				Setup hint
		Dynamic	It allows you to choose from 3 modes.
			Dynamic: Sharpen the gradation to improve the contrast
Contrast Mode				feeling.
		Normal	Normal	: Improve the contrast feeling to reproduce a
				faithful gradation.
		Linear	Linear	: Reproduce as faithful gradation as possible.
		Off	On : It automatically adjusts the suitable tint, color density,
3D Color Management			and brightness on images.
		On	Off : Set it off if the image does not look natural.
		Off
Black Enhancement		Low	Adjusts the black level compensation.
		Middle
		High
		Off	This function is available only if D-sub 15 pin - composite
			cable is used.
		Low	This reduces the dot and color blurring in minute scales so
3D Comb Filter			that it can reproduce purer color.
		Middle	This is not available for NTSC4.43, PAL60, SECAM,
			PAL-N and PAL-M system.
		High	This is available only when receiving NTSC3.58/PAL
			composite signal.
Reset			Each item on this menu screen can be restored to the
			factory settings by pressing the OK button.
		Amplitude	On: When you want to set specific adjustments in each of
		Red	the 3 Color Temperature modes. You can adjust on
			the Amplitude and Cut Off. The settings reflect on the
		Green
			Color Temperature.
		Blue	Amplitude: Subdue the colors (Red/Green/Blue) on
				the brighter parts (-63~0).
	On	Cut Off
			Cut Off : Subdue the colors (Red/Green/Blue) on
Color Temp. Adjust		Red		the darker parts (-31~+31).
		Green	Reset (Available when On): Select to restore amplitude
			and Cut Off adjustments to default settings by pressing the
		Blue
			OK button.
		Reset
	Off		Off: Remains as default setting.

ENGLISH

34