First time use
Connecting External Video Sources
The FRONT panel jacks are provided as a convenience to allow you to easily connect a camcorder , DVD, Video Game and a VCR as shown in the following examples:
FRONT INPUT PANEL
PHOTO INPUT
PUSH EJECT
Note : For Monoaural devices, please connect Audio signal cable into L/Mono input jack .
Note : Special device cables will be |
| OUTPUT |
according to the own device | Video | L R |
specifications. |
|
|
| COMPOSITE VIDEO |
|
Video Game | OUTPUT CAPABILITY |
|
DVD , Video Game |
| |
| Console. | Video Camera |
|
|
NOTE: 1. Completely insert connection cord plugs when connecting to front panel jacks. If you do not, the played back picture may be abnormal.
The exact arrangement you use to connect the VCR, camcorder, laserdisc player, DVD player, or HDTV Set Top Box to your Plasma TV is dependent on the model and features of each component. Check the owner’s manual of each component for the location of video and audio inputs and outputs.
The following connection diagrams are offered as suggestions. However, you may need to modify them to accommodate your particular assortment of components and features. For best performance, video and audio cables should be made from coaxial shielded wire.
Before Operating External Video Source
Connect an external source to one of the INPUT terminals, then press the INPUTS button to show the INPUTS menu. Use the CURSOR PAD ( and ) to select the Input of your choice. Then press the SELECT button or the CURSOR PAD to confirm your choice (see page 26).
Photo Input
Air /Cable
Input 1 |
|
Input 2 |
|
Move | SEL Sel. |
16