Hitachi L26H01AU, L32H01AU manual Connecting the plug into the wall socket, Secure the power cord

CONNECTION (continued)

Connecting Procedure (continued)

4. Connecting the plug into the wall socket

Connect the power cord after completing all other connections. (The type of plug is different from this drawing for some countries.)

CAUTION

ƔUse only the power cord provided.

ƔDo not use a power supply voltage other than that indicated (AC110-240V, 50/60Hz). It may cause fire or electric shock.

ƔFor the LCD panel, a three-core power cord with a ground terminal is used for efficiency protection. Always be sure to connect the power cord to a three-pronged grounded outlet and make sure that the cord is properly grounded. If you use a power source converter plug, use an outlet with a ground terminal and screw down the ground line.

ƔEnsure that both ends of power cord are easily accessible.

ƔIf you have to change the power cord, please use the certified power cord that meets your region’s safety standard.

Information

z How to secure the power cord and cables

Step 1. Secure the power cord

After connecting power cord to the rear panel, secure the power cord with the clamp.

Clamp for power cord

(example: L32H01AU)

Step 2. Secure all cables

Secure all cables together with power cord by using large clamp.

(example: L32H01AU)		Large clamp
	!

NOTE

ƔWhen you secure the cables, please be careful not to tighten too much.

18