Hitachi L15TA11W user manual Video Input, Component Input ports

Connection Instructions

COMPONENT (If connected to S-VIDEO,select the S-VIDEO external input source.)

3.Refer to the DVD player's manual for operating instructions.

Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below.

S-VIDEO Input

-To avoid picture noise (interference), leave an adequate distance between the VCR and TV

Connection and use steps:

1.Read the user guide supplied with your AV devices and ensure that it has S-Video connectors;

2.Make sure that the power of the LCD-TV and the AV device are switched off;

Connection Option 1

Set VCR output switch to 3 or 4 and then tune TV to the same channel number.

Connection Option 2
1. Connect the audio and S-VIDEO cables
from the VCR's output jacks to the TV
input jacks, as shown in the figure.
2. Insert a video tape into the VCR and
press PLAY on the VCR. (Refer to the
VCR owner s manual.)
3.Turn on the power of the LCD-TV first ;	2
and then turn on the power of the AV
device;
4.Press the SOURCE button to set the video
.
input mode of the LCD-TV to S-VIDEO
mode .

1

VCR