Basic Operation
Power On/Off
To turn on the TV
1Press the “ ” position of the main power switch located on the rear panel.
The power indicator lights in red, indicating that the TV is in standby mode.
2Press 
or 
/
.
The power indicator lights in green and the TV turns on.
To turn off the TV
1Press 
.
The power indicator lights in red and the TV turns off to standby mode.
2Press the “
” position of the main power switch located on the rear panel to completely power off the TV.
• It takes approximately 10 seconds for the picture to appear after the TV is turned on.
•The TV will switch to standby mode automatically if there is no signal input for 10 minutes.
•If the TV will not be used for a long periods of time, unplug the TV from the wall outlet.
Channel Selection
To select a channel
1Press
/ or Program Select buttons to select the channel number directly.
Input Source Selection
To select input source
1Press 
.
2 Press 
to select the desired input source (TV, AV1, AV2, AV3,
The selected input source image displays.
• AV1~4, HDMI1~2 and RGB can be selected directly using the Direct Input Select buttons.
Volume Adjustment
To change the volume
1Press
to increase the sound volume.
2Press
to decrease the sound volume.
To mute the sound
1Press
to temporarily turn off the sound.
2Press
or
to restore the sound to previous level.
• You can decrease the sound volume by pressing while the sound is muted.
On-Screen Display (OSD) Selection and Adjustment
1Press
to display the main menu.
2 | Press | to select a menu. |
| The selected menu page displays. | |
3 | Press | to set your selection. |
4 | Press | to choose an item on the menu |
| page and press to set your selection. | |
5 | Press | to adjust an item value or choose |
| options. |
|
6Press
to return to the menu, press
again to exit.
• The OSD menu screen will be closed automatically when no operation has been made for the set OSD menu display time.
11