Hitachi L26H01AU manual TV Setup Operation Picture Setting

TV SETUP OPERATION (continued)

Picture Setting

You can make specific adjustments for the picture based on your preference.

1.Press button.

2.Select “Picture” menu and press button.

3.Select the preferred menu item and press button.

(By pressing ź button at the bottom of each menu page, the next Picture menu will appear on the screen.)

NOTE

Please see 32 about picture setting of PC

Page 1

Picture

Page 2!

Picture

Picture Mode

Contrast

Brightness

Color

Sharpness

Tint

Color Temperature

Back Light

Reset

Select OK Set

Dynmaic

+31

0

0

0

0

Cool

High

Reset

Return

Black Enhancement	Off
DNR	Off
MPEG NR	Off
Film Mode	Off
3D Comb Filter	Off
Picture Size	1
Reset	Reset
Select OK Set	Return

Selected Items					Setup hint
	Dynamic	You can make the better selection from 3 modes
		Depending on the lighting condition and intended use.
	Natural
Picture Mode		Dynamic : Suitable for the brighter conditions.
		Natural	: Suitable for the normal lighting condition.
	Cinema
		Cinema	: Suitable for watching movie.
Contrast*	-31~+31	This adjusts the contrast to meet the lighting environment by using				button.
Brightness*	-31~+31	With this function, black is adjusted to change the overall brightness by using
		button.
Color*	-31~+31	It can adjust color density based on your preference by using				button
Sharpness*	-15~+15	Preferred sharpness can be adjusted by pressing
		button for softer image or			button for sharper image.
		Pressing	button enhances red and weakens Yellow, while pressing
Tint*	-31~+31	button weakens red and enhances Yellow.
		The setup hint is adjusting for the realistic skin color.
		This is not available by PC mode when receiving RGB signal.
	Cool	You can select from 3 settings (default): Cool, Normal, Warm depending on the
Color	Normal
		color condition with		buttons.
Temperature*	Warm
		You can adjust the setting in “User” item.
	User
	High
Back Light	Middle	Adjust the brightness of the Back Light for the maximum visibility.
	Low
Reset		Each item on this menu screen can be restored to the original factory settings by
		pressing	button.

Information

The setting of the items indicated by “ *” can be stored for each of inputs and picture modes (Dynamic/Natural/Cinema). You can enjoy different setting depending on the selected input such as VCR in AV3.

27