5.Adjustment
5.1 SERVICE (FACTORY) MODE ACCESS
This model has a Factory Mode, where the technician can access and adjust some of the color temperature settings. The Factory Mode has several different appearances, depending on the input signal.
Picture Setting |
| NTSC |
|
for Factory Model |
|
| |
|
|
| |
|
|
|
|
Table1 |
| TV |
|
|
|
|
|
Table2 |
| AV |
|
|
|
|
|
Table3 |
|
| |
|
|
|
|
Table4 |
| 480i(component) |
|
|
|
|
|
Table5 |
| 480p(component) |
|
|
|
|
|
Table6 |
| 1080i/60(component) |
|
|
|
|
|
Table7 |
| 720P/60(component) |
|
|
|
|
|
|
|
|
|
Picture Setting |
| PAL |
|
for Factory Model |
|
| |
|
|
| |
|
|
|
|
Table1 |
| TV |
|
|
|
|
|
Table2 |
| AV |
|
|
|
|
|
Table3 |
|
|
|
|
|
|
|
Table4 |
| 576i(component) |
|
|
|
|
|
Table5 |
| 576p(component) |
|
|
|
|
|
Table6 |
| 1080i/50(component) |
|
|
|
|
|
Table7 |
| 720P/50(component) |
|
|
|
|
|
Preliminary
1.To access the Factory Mode, the TV must be running.
Procedure
2. Press and hold the #3 and #4 button (PROGRAM T and VOLUMES). | ① | ② |
3.While continuing to hold the #3 and #4 button, press and hold the #1 button
4.After both buttons have been held down for five (5) seconds, first release the #1 button, then release the #3 and #4 button.
5.As stated previously, the input that the TV had selected at the time will determine which actual FACTORY MODE display will show up. (See next page)
9
Downloaded From