Hitachi 26LD9000TA user manual Setup Menu RGB mode

MENU OPERATION (continued)

Setup Menu (RGB mode)

With this menu, you can adjust the display condition of the image which is inputting from the RGB terminals.

Setup
Auto Adjust	Ź
Image Position	Ź
Horizontal Clock	41
Clock Phase	34
Reset	Reset
Select ŻŹSet	Return

ENGLISH

Selected Items	Setup hint
	Adjust Horizontal Position, Vertical Position, Horizontal
	Clock, and Clock Phase automatically.
Auto Adjust	• Press OK or Xbutton to start auto adjustment.
	The message “Auto Adjusting” is displayed.

•Depending on the type of the signal, there is a possibility that the display may not be adjusted in its optimum condition with this function. In that case, please adjust

Image Position*		• Press OK button and ŸźWXbutton to adjust the horizontal
		and vertical display positions.
Horizontal Clock*	0~100	Minimize the vertical stripes on the screen.
		Minimize the blurring of the letters and stripes on horizontal
Clock Phase*	0~63	row.
		• Make sure to adjust Horizontal Clock first before adjusting
		Clock Phase.
Reset		Image Position on this menu screen can be restored to the
		original factory settings by pressing OK button.

Information

The items indicated by “ * ” can be automatically stored the setting depending on the signal mode.

25