Hitachi 26HDL52 important safety instructions ⑱ Ntsc Tuner, ⑲ DTV Tuner

⑫SUBWOOFER Output

Connect this SUB WOOFER OUT output to the external audio component input.

⑬AUDIO Output

These jacks provide fixed audio signal which are used for recording.

⑭MONITOR Output (S VIDEO)

This jack provides S video signal which are used for recording. (Please refer to monitor output table as below)

⑮MONITOR Output (VIDEO)

This jack provides video and audio signals which are used for recording. (Please refer to monitor output table as below)

Monitor output table:

(a) Normal mode:

English

Output

Input

DTV

NTSC

VIDEO1/ VIDEO2 VIDEO3/ VIDEO4 (VIDEO) VIDEO3/ VIDEO4 (S-VIDEO) ANALOG RGB DVI

S-VIDEO	VIDEO	AUDIO
○	○	○
×	○	○
×	×	×
×	○	○
○	×	○
×	×	×
×	×	×

(b)For POP/PIP mode:

The monitor output is according to user‘s selected source, the speaker’s position. The output table should be the same with the above table.

⑯ L/MONO /R (VIDEO 1 and VIDEO 2)

Connect audio of external devices.(if you have mono sound, insert the audio cable into the left (L) audio jack).

⑰Y-PBPR(VIDEO 1 and VIDEO 2)

Provide Y-PBPRjacks for connecting equipment with this capability, such as a DVD player or Set Top Box

⑱NTSC TUNER

RF input that connects to the antenna, cable box, or CATV cable. Support NTSC TV system.

⑲DTV TUNER

RF input that connects to the antenna, cable box, or CATV cable. Support ATSC TV system.

17