Monitor Display modes, To return to normal mode

Connections to other equipment

(continued)

Using an AV Amplifier with built-in digital surround

If you are using an AV amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie.

Connect an AV amplifier with built-in Dolby Digital decoder, etc. as shown below.

Rear of the unit

To DIGITAL AUDIO COAXIAL OUT Coaxial digital cable (not supplied)

To Coaxial

Digital Audio IN

Front

Speaker

(Left)

Front

Subwoofer Speaker

(Right)

Center Speaker

ENGLISH

AV Amplifier with built-in digital surround decoder as listed above

Surround	Surround
Speaker (Left)	Speaker
	(Right)

NOTE:

• When you are viewing digital broadcast, this unit will not work in conjunction with DTS audio or MPEG audio. There will be no sound output if connected to an AV amplifier with a built-in DTS decoder or MPEG decoder.

To connect the TV to a PC (Personal Computer)

Before you connect this TV to your PC, change the adjustment of your PC’s Resolution and Refresh rate (60 Hz). Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the VGA connector PC MONITOR IN on the rear of the TV. Attach the connectors firmly with the screws on the plug. In case of a Multimedia computer, connect the audio cord to the audio output of your Multimedia computer and to the AUDIO connector of the PC/DVI AUDIO IN jack of the TV.You can also connect the PC with HDMI cable. If you use HDMI cable, you don’t have to connect the audio cord. If you use a DVI-to-HDMI cable, please connect an audio cord in the same way as VGA cable.

Press INPUT on the remote control to select PC mode.

Switch on the computer. The TV can operate as the computer monitor.

Rear of the unit

		To PC
		MONITOR
	To PC/DVI	IN
	To PC/DVI	VGA cable (not supplied)
	AUDIO IN	VGA cable (not supplied)
	To HDMI1/DVI	Audio cord (not supplied)
		HDMI cable (not supplied)

Monitor Display modes

MODE Resolution Refresh rate

VGA	640x480	60/ 72/ 75 Hz
VGA	720x400	70Hz
SVGA	800x600	56/ 60/ 72/ 75 Hz
XGA	1024x768	60/ 70/ 75 Hz
WXGA	1280x768	60Hz
WXGA	1280x720	60Hz
WXGA	1360x768	60Hz

To return to normal mode

Press INPUT again.

NOTE:

• The on-screen displays will have a different appearance in PC mode than in TV mode.

• If there is no video signal from the PC when the unit is in PC mode, “No signal” will appear on the TV-screen.