Hitachi DVP335E Connection to a TV for video Method, Better picture Best picture, Pin Scart Jack

CONNECTIONS

Connection to a TV (for video)

TV

	Method 1	Method 2	Method 3
Basic Audio	Good picture	Better picture	Best picture
R L	VIDEO IN	S-VIDEO IN
		21 pin Scart
		jack

AV Cable

DVD

S-Video

Cable

or

Euro audio/video Cable

or

AV RGB TV

R	L
ANALOG
AUDIO OUT	VIDEO
	OUT	S-VIDEO
		OUT
Analog Audio out	Video out	S-Video out	EURO Audio/Video out

•Method 1 DVD Player + TV with Video Input Jack

•Method 2 DVD Player + TV with S-Video Input Jack

•Method 3 DVD Player + TV with 21 pin scart Jack

NOTES

•If you use the Euro audio/video cable, it is not necessary to connect the analog audio cable.

•Connect the DVD player directly to a TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system.

HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS

If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD player to your TV’s 75-ohm coaxial antenna terminal using a commercially available Stereo Audio/Video RF Modulator, not included. Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and then connect the coaxial output of the RF Modulator (usually marked “TO TV”) to the 75 ohm coaxial antenna terminal on your TV. Follow the instruction supplied with the RF Modulator for more details.

If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that cable from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator (usually marked “ANT IN”), then connect the RF modulator to your TV’s antenna

terminal as described above.

NOTE

•The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal through an RF Modulator.

– 12 – EN