FUNCTIONAL OVERVIEW
FRONT PANEL
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | [Fig. 1] |
|
|
|
|
|
|
|
|
REAR VIEW
9
10 | 11 12 | 13 | 14 |
1.y/I (POWER/STANDBY) Switch the player to ON or OFF.
(As to the indication of the Operate switch, “I” indicates ON and “y” indicates electrical power STANDBY.)
2.SKIP/FR
Go to previous chapter or track during playback; Press and hold for 1.5 seconds for a reverse search.
3.PLAY
Start or resume disc playback.
Press to switch progressive scanning mode and interlace mode. (refer to page 5.)
4.FF/SKIP
Go to next chapter or track during playback;
Press and hold for 1.5 seconds for a forward search.
5.STOP
Stop playback.
6.OPEN/CLOSE Open/close the disc tray.
7.Disc tray
8.Display
[Fig. 2]
9.MAIN (AC Power Cord) Connect to a standard AC outlet.
10.COAXIAL (Digital audio out)
Use coaxial digital audio out to connect to a compatible Dolby Digital receiver. Use to connect to a Dolby Digital decoder or DTS decoder.
11.AUDIO OUT (Left/Right)
Connect to the AUDIO inputs of an amplifier, receiver or stereo system.
12.VIDEO OUT
Use a video cable to connect one of the jack to Video input on your
13.COMPONENT VIDEO OUT
Connect to a TV with the Component video in jacks.
14.
Use the
Caution: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the player.
– 6 – | EN |